Self-Excited Standing Wave Generated in Subcooled Boiling

Forced Convection Subcooled Boiling of Binary Mixtures

A mode based on an additive mechanism of heat transfer is proposed for forced convection subcooled boiling of binary mixtures. The contributing modes of heat transfer are: (i) the heat transferred as latent heat by the rising bubbles, (ii) the heat transferred as the heat contained in the superheated thermal layer that is removed from the surface in the wake of the rising bubbles and (iii) the ...

Critical Heat Flux in Subcooled Flow Boiling of Water

Development of a Numerical Model for Subcooled Boiling Flow

Population balance equations combined with a threedimensional two-fluid model are employed to predict bubbly flows with the presence of heat and mass transfer processes. Subcooled boiling flow belongs to this specific category of bubbly flows is considered. The MUSIG (MUltiple-SIze-Group) model implemented in CFX4.4 is further developed to account for the wall nucleation and condensation in the...

Direct Numerical Simulation of Subcooled Nucleate Pool Boiling

With the long-term objective of Critical Heat Flux (CHF) prediction, a Direct Numerical Simulation (DNS) framework for simulation of subcooled and saturated nucleate pool boiling is developed. One case of saturated, and three cases of subcooled boiling at different subcooling levels are simulated. Grid refinement study is also reported. Both boiling and condensation phenomena can be computed si...

Instability of subcooled boiling film on a vertical wall

Consider a vertical plate with a leading edge. The temperature of the plate is above the spontaneous nucleation temperature, so that vapor completely covers the plate. Two-dimensional quasi-parallel theory is used to examine the stability of the two-phase system. Numerical calculations show that the main parameter determining the thickness of the vapor film and its stability is the difference b...