Self-Loosening Problems of Preloaded Bolted Joints
نویسندگان
چکیده
منابع مشابه
Bolted Timber Joints with Self-tapping Screws
The use of self-tapping screws with continuous threads in the joint area as a reinforcement to avoid splitting of timber members is studied. A theoretical model is developed to calculate the stress distribution around a pin-loaded hole in a timber joint, to predict brittle failure modes in bolted connections and to calculate the load in the reinforcing screws. Laboratory experiments on reinforc...
متن کاملBolted Joints in Laminated Composites
Expressions were presented which can be used to estimate the strengths of continuous fiber reinforced composite laminates containing pin-loaded holes. The expressions apply to laminates containing either a single pin loaded hole, a single row of pin loaded holes, or two parallel rows of pin loaded holes.
متن کاملIdentification of Bolted Joints through Laser Vibrometry
We present a new technique for identifying the dynamics of bolted joints. The technique relies on the comparison of the overall dynamics of the bolted structure to that of a similar but unbolted one. The di!erence in the dynamics of the two systems can be attributed solely to the joint; modelling this di!erence in the dynamics enables us to construct a non-parametric model for the joint dynamic...
متن کاملStiffness Analysis of Parallel Manipulators with Preloaded Passive Joints
The paper presents a methodology for the enhanced stiffness analysis of parallel manipulators with internal preloading in passive joints. It also takes into account influence of the external loading and allows computing both the non-linear “load-deflection” relation and the stiffness matrices for any given location of the end-platform or actuating drives. Using this methodology, it is proposed ...
متن کاملAnalytical Modeling of Thermal Resistance in Bolted Joints
An analytical approximate solution is developed for predicting the thermal resistance of bolted joints between two square plates . of the same material but different thicknesses. The plates are assumed to have perfectly flat and smooth surfaces, and they are joined by a bolted connection at the center of the square, forming a concentric annular contact region at the interface. The entire surfac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Uludağ University Journal of The Faculty of Engineering
سال: 2015
ISSN: 2148-4155,2148-4147
DOI: 10.17482/uujfe.55509