Semi-dynamic Simulation of ORC Based Diesel Engine WHR System
نویسندگان
چکیده
منابع مشابه
Performance Analysis of the Vehicle Diesel Engine-ORC Combined System Based on a Screw Expander
To achieve energy saving and emission reduction for vehicle diesel engines, the organic Rankine cycle (ORC) was employed to recover waste heat from vehicle diesel engines, R245fa was used as ORC working fluid, and the resulting vehicle diesel engine-ORC combined system was presented. The variation law of engine exhaust energy rate under various operating conditions was obtained, and the running...
متن کاملPerformance Analysis of an Evaporator for a Diesel Engine–Organic Rankine Cycle (ORC) Combined System and Influence of Pressure Drop on the Diesel Engine Operating Characteristics
The main purpose of this research is to analyze the performance of an evaporator for the organic Rankine cycle (ORC) system and discuss the influence of the evaporator on the operating characteristics of diesel engine. A simulation model of fin-and-tube evaporator of the ORC system is established by using Fluent software. Then, the flow and heat transfer characteristics of the exhaust at the ev...
متن کاملImproved Turbine Engine Hierarchical Modeling and Simulation Based on Engine Fuel Control System
Aircraft engines constitute a complex system, requiring adequate mon-itoring to ensure flight safety and timely maintenance. The best way to achieve this, is modeling the engine. Therefore, in this paper, a suitable mathematical model from engine controller design point of view, for a specific aero turbine engine is proposed by the aid of MATLAB/Simulink software. The model is capable of reduc...
متن کاملSemi-physical mean-value NOx model for diesel engine control
In this paper, a new physics-based model for the prediction of NOx emissions produced by diesel engines is presented. The aim of this work is to provide a Mean-Value Model (MVM) adapted for control design and online estimation. The proposed approach is based on the simplification of a zero-dimensional thermodynamic model. Only the main phenomena taking part in NOx formation are kept and they ar...
متن کاملA Semi-empirical Model to Predict Diesel Engine Combustion Parameters
To carry out the investigation, a cylinder pressure model was developed based on the position of the crankshaft, engine load, engine speed, and fuel injection time. This model takes into account the maximum number of parameters involved. The accuracy of the model was verified by experimental results. The average error of the cylinder pressure, the average radical of the square of the error of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2014
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2014.11.945