Sensitivity of beam-column element stiffness matrix to the crack parameters
نویسندگان
چکیده
منابع مشابه
Finite element analysis of a rigid beam to column connection reinforced with channels
Abstract: This research work presents a new rigid connection constructed with channels. In order to assess its hysteresis behavior, three specimens with different cover plates and six specimens with different panel zone thickness have been considered. The energy absorbed by the connection and the behavior of the panel zone were studied during cyclic loading and compared with those of connectio...
متن کاملPhoton-beam subsource sensitivity to the initial electron-beam parameters.
One limitation to the widespread implementation of Monte Carlo (MC) patient dose-calculation algorithms for radiotherapy is the lack of a general and accurate source model of the accelerator radiation source. Our aim in this work is to investigate the sensitivity of the photon-beam subsource distributions in a MC source model (with target, primary collimator, and flattening filter photon subsou...
متن کاملPredicting Low Cycle Fatigue Life through Simulation of Crack in Cover Plate Welded Beam to Column Connections
This paper presents a low cycle fatigue life curve by simulating a crack in a cover plate welded moment connection. Initiation of ductile fracture in steel is controlled by growth and coalescence of micro-voids. This research used a numerical method using finite element modeling and simulation of ductile crack initiation by a micromechanical model. Therefore, a finite element model of a cover p...
متن کاملCoupled Bending-Longitudinal Vibration of Three Layer Sandwich Beam using Exact Dynamic Stiffness Matrix
A Newtonian (vectorial) approach is used to develop the governing differential equations of motion for a three layer sandwich beam in which the uniform distribution of mass and stiffness is dealt with exactly. The model allows for each layer of material to be of unequal thickness and the effects of coupled bending and longitudinal motion are accounted for. This results in an eighth order ordina...
متن کاملEffect of Bed and Crack on the Natural Frequency for the Timoshenko Beam Using Finite Element Method
In this study, the natural frequencies and mode shapes of beams without cracks and cracked Timoshenko beams is calculated with different boundary conditions using finite element method. The energy method is used to solve the equations. Hardness and softness matrices for Timoshenko beam without crack are obtained by solving the potential and kinetic energy equations. Then for investigation of cr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Vibroengineering
سال: 2018
ISSN: 1392-8716,2538-8460
DOI: 10.21595/jve.2018.19397