Sensor Integrated Load-Bearing Structures: Measuring Axis Extension with DIC-Based Transducers
نویسندگان
چکیده
منابع مشابه
A multi-axis MEMS sensor with integrated carbon nanotube-based piezoresistors for nanonewton level force metrology.
This paper presents the design and fabrication of a multi-axis microelectromechanical system (MEMS) force sensor with integrated carbon nanotube (CNT)-based piezoresistive sensors. Through the use of proper CNT selection and sensor fabrication techniques, the performance of the CNT-based MEMS force sensor was increased by approximately two orders of magnitude as compared to current CNT-based se...
متن کاملMicro-Fluidic Channels with Integrated Ultrasonic Transducers
This paper describes the work done in an attempt to integrate ultrasonic sensors in micro-fluidic channels. We have developed a system with fluidic channels having embedded zinc oxide transducers. A zinc oxide film is deposited on a glass substrate and is sandwiched between two electrodes. The transducers made are found to resonate at 400 MHz in thickness mode. The channels are made both from P...
متن کاملVibration Analysis of a Sensor-Integrated Ball Bearing
This paper presents an analysis of the vibrational behavior of a deep groove ball bearing with a structurally integrated force sensor. The miniaturized force sensor, accommodated within a slot on the bearing’s outer ring, provides on-line condition monitoring capability to the bearing. Analytical and finite element models were developed to predict the sensor output due to bearing dynamic load a...
متن کاملPredicting Usefulness of Measuring Structures during Load Tests
This paper presents an approach for model identifiability that builds upon recent research into measurement data interpretation. The objective of this approach is to determine probabilistically to what degree the number of models able to explain a measured behaviour can be reduced in comparison to the initial solution space. The procedure is intended to be used prior to obtaining measurements f...
متن کاملBearing Testing Machine with Rotating Load Vector
A concept of new test stand for investigating fatigue strength of plain bearing surface layer has been presented in the paper. The machine with rotating load vector was designed, built and experimentally verified in tribological laboratory of the Technical University of Gdańsk. The machine of such a principle of slide bearing surface layer load generation is, according to ISO 7905 standard, a b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2021
ISSN: 1424-8220
DOI: 10.3390/s21124104