Sensor placement on slender structural systems
نویسندگان
چکیده
منابع مشابه
Implementing the most efficient sensor placement methods on the ship structural model
The damage and failure in engineering structures, especially offshore structures, and hull of ship structures, causes economic losses, human disasters, and environmental problems. Therefore, diagnosing and predicting the occurrence of failure in these structures is vital. In this situation, engineers have introduced the use of structural health monitoring operations as a suitable way to prevent...
متن کاملStructural Optimization of Slender Robot Arm Based on Sensitivity Analysis
An effective structural optimizationmethod based on a sensitivity analysis is proposed to optimize the variable section of a slender robot arm. The structure mechanism and the operating principle of a polishing robot are introduced firstly, and its stiffness model is established. Then, a design of sensitivity analysis method and a sequential linear programming SLP strategy are developed. At the...
متن کاملOptimal sensor placement in structural health monitoring using discrete optimization
The objective of optimal sensor placement (OSP) is to obtain a sensor layout that gives as much information of the dynamic system as possible in structural health monitoring (SHM). The process of OSP can be formulated as a discrete minimization (or maximization) problem with the sensor locations as the design variables, conditional on the constraint of a given sensor number. In this paper, we p...
متن کاملSensor Placement for Structural Damage Detection Considering Measurement Uncertainties
Structural damage detection methods using vibration measurements have been developed for decades. Measurement selections may affect damage detection results, because inevitable uncertainties are involved in vibration testing. A new sensor placement index is defined as the ratio of two parameters, namely, the contribution of measurement points to a Fisher information matrix, and the damage sensi...
متن کاملSensor Placement for Structural Monitoring of Transmission Line Towers
Transmission line towers are usually analyzed using linear elastic idealized truss models. Due to the assumptions used in the analysis, there are discrepancies between the actual results obtained from full-scale prototype testing and the analytical results. Therefore, design engineers are interested in assessing the actual stress levels in transmission line towers. Since it is costly to place s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Computational Methods and Experimental Measurements
سال: 2015
ISSN: 2046-0546,2046-0554
DOI: 10.2495/cmem-v3-n1-13-20