Sequential damage study induced in fiber reinforced composites by shear and tensile stress using a newly developed Arcan fixture
نویسندگان
چکیده
منابع مشابه
Strong Influence of a Small Fiber on Shear Stress in Fiber-Reinforced Composites
In stiff fiber-reinforced material, the high shear stress concentration occurs in the narrow region between fibers. With the addition of a small geometric change in crosssection, such as a thin fiber or a overhanging part of fiber, the concentration is significantly increased. This paper presents mathematical analysis to explain the rapidly increased growth of the stress by a small particle in ...
متن کاملFiber reinforced plastic composites using recycled materials
This work investigates the feasibility of using recycled high density polyethylene (rHDPE), recycled polypropylene (rPP) and old newsprint fiber (ONP) to manufacture fiber reinforced composites. The boards were made through air-forming and hot press. The effects of the fiber loading and coupling agent content on tensile, flexural, internal bond properties and water absorption and thickness swel...
متن کاملMatrix cracking of fiber-reinforced ceramic composites in shear
The mechanics of cracking in fiber-reinforced ceramic matrix composites (CMCs) under general loadings remains incomplete. The present paper addresses one outstanding aspect of this problem: the development of matrix cracks in unidirectional plies under shear loading. To this end, we develop a model based on potential energy differences upstream and downstream of a fully bridged steady-state mat...
متن کاملCharacterization of Fiber-reinforced Cement Composites by Their Tensile Stress- Strain Behavior and Quantification of Crack Formation
The behavior of fiber reinforced cement composites (FRCC) can be described and quantified by a variety of parameters, such as strength and strain capacity, toughness index, and fracture energy, obtained from tests in tension or bending in a large number different configurations including varying specimen geometries and test setups. Depending on the details of the individual testing procedures, ...
متن کاملMicrorobot Design Using Fiber Reinforced Composites
Mobile microrobots with characteristic dimensions on the order of 1cm are difficult to design using either MEMS (microelectromechanical systems) technology or precision machining. This is due to the challenges associated with constructing the high strength links and high-speed, low-loss joints with micron scale features required for such systems. Here we present an entirely new framework for cr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research and Technology
سال: 2020
ISSN: 2238-7854
DOI: 10.1016/j.jmrt.2020.09.067