SESAME project: advancements in liquid metal thermal hydraulics experiments and simulations
نویسندگان
چکیده
منابع مشابه
Thermal Hydraulics Design Limits
The following discussion of PWR steady state and transient design limits is extracted from the theses of Carter Shuffler and Jarrod Trant while the BWR discussion is extracted from Paolo Ferroni's thesis (covers steady state only). These limits are a simplified and narrower discussion than the relevant NRC standard review plan you will also be referred to. All materials are directly extracted f...
متن کاملLarge-Scale Simulations on Thermal-Hydraulics in Fuel Bundles of Advanced Nuclear Reactors
In order to predict the water-vapor two-phase flow dynamics in a fuel bundle of an advanced light-water reactor, large-scale numerical simulations were performed using a highly parallel-vector supercomputer, the earth simulator. Although conventional analysis methods such as subchannel codes and system analysis codes need composition equations based on the experimental data, it is difficult to ...
متن کاملRecent Advancements in Liquid Metal Flexible Printed Electronics: Properties, Technologies, and Applications
This article presents an overview on typical properties, technologies, and applications of liquid metal based flexible printed electronics. The core manufacturing material—room-temperature liquid metal, currently mainly represented by gallium and its alloys with the properties of excellent resistivity, enormous bendability, low adhesion, and large surface tension, was focused on in particular. ...
متن کاملLagrangian data assimilation for river hydraulics simulations
We present a method to use lagrangian data from remote sensing observation in a variational data assimilation process for a river hydraulics model based on the bidimensional shallow water equations. The trajectories of particles advected by the flow can be extracted from video images and are used in addition to classical eulerian observations. This lagrangian data brings information on the surf...
متن کاملAppendix 1 Thermal Hydraulics, Draft for Comment
Several different fuel failure criteria have been used in previously NRC-sponsored SFP accident studies. Benjamin, et. al. used the onset of runaway fuel clad oxidation as the fuel failure criterion in NUREG/CR-0649 [Ref. 1]. This criterion was criticized because clad rupture can occur at a relatively low temperature causing a gap release. The consequences of gap release can be significant if t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Nuclear Sciences & Technologies
سال: 2020
ISSN: 2491-9292
DOI: 10.1051/epjn/2019046