Shape Estimation of Soft Manipulator Using Stretchable Sensor
نویسندگان
چکیده
منابع مشابه
Soft and Stretchable Sensor Using Biocompatible Electrodes and Liquid
This article introduces a soft and stretchable sensor composed of silicone rubber integrating a conductive liquidfilled channel with a biocompatible sodium chloride (NaCl) solution and novel stretchable gold sputtered electrodes to facilitate the biocompatibility of the sensor. By stretching the sensor, the cross section of the channel deforms, thus leading to a change in electrical resistance....
متن کاملSoft and Stretchable Sensor Using Biocompatible Electrodes and Liquid for Medical Applications
This article introduces a soft and stretchable sensor composed of silicone rubber integrating a conductive liquid-filled channel with a biocompatible sodium chloride (NaCl) solution and novel stretchable gold sputtered electrodes to facilitate the biocompatibility of the sensor. By stretching the sensor, the cross section of the channel deforms, thus leading to a change in electrical resistance...
متن کاملDexterous Workspace Shape and Size Optimization of Tricept Parallel Manipulator
This work intends to deal with the optimal kinematic synthesis problem of Tricept parallel manipulator. Observing that cuboid workspaces are desirable for most machines, we use the concept of effective inscribed cuboid workspace, which reflects requirements on the workspace shape, volume and quality, simultaneously. The effectiveness of a workspace is characterized by the dexterity of the manip...
متن کاملEstimation of COD removal via soft sensor
In conventional wastewater treatment one of the main problems confronting the plant manager is the estimation of the organic carbon removal efficiency, from which a mass balance can be computed. This paper presents a simple, albeit approximate, solution to this problem via a soft sensor approach. The basic idea is to apply a set-point control to the dissolved oxygen in the aerated compartment, ...
متن کاملA Stretchable Radio-Frequency Strain Sensor Using Screen Printing Technology
In this paper, we propose a stretchable radio-frequency (RF) strain sensor fabricated with screen printing technology. The RF sensor is designed using a half-wavelength patch that resonates at 3.7 GHz. The resonant frequency is determined by the length of the patch, and it therefore changes when the patch is stretched. Polydimethylsiloxane (PDMS) is used to create the substrate, because of its ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Cyborg and Bionic Systems
سال: 2021
ISSN: 2692-7632
DOI: 10.34133/2021/9843894