Shape optimization using the cut finite element method
نویسندگان
چکیده
منابع مشابه
buckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
Preform Shape Optimization of Connecting Rod Using Finite Element Method and Taguchi Method
Preform design in forging processes is an important aspect for improving the forging quality and decreasing the production cost. The objective of this paper is to obtain an optimal perform shape in the consideration of the influence of the metal flow deformation in closed die forging process. Finite element method based DEFORMTM 3D software in conjunction with Taguchi method has been used to si...
متن کاملOptimization of Thermalisation Loss in the Quantum Dot Solar Cells using a Finite Element Method
As thermalisation loss is the dominant loss process in the quantum dot intermediate band solar cells (QD-IBSCs), it has been investigated and calculated for a QD-IBSC, where IB is created by embedding a stack of InAs(1-x) Nx QDs with a square pyramid shape in the intrinsic layer of the AlPySb(1-y) p-i-n structure. IB, which is an optically coupled but electrically isolated mini-band, divides th...
متن کاملStructural Topology Optimization Using Finite Element Based Level Set Method Structural Topology Optimization Using Finite Element Based Level Set Method
A finite element based level set method is proposed for structural topology optimization. Because both the level set equation and the reinitialization equation are advection dominated partial differential equations, the standard Galerkin finite element method may produce oscillating results. In this paper, both equations are solved using a streamline diffusion finite element method (SDFEM). The...
متن کاملTOPOLOGY OPTIMIZATION OF 2D BUILDING FRAMES UNDER ARTIFICIAL EARTHQUAKE GROUND MOTIONS USING POLYGONAL FINITE ELEMENT METHOD
In this article, topology optimization of two-dimensional (2D) building frames subjected to seismic loading is performed using the polygonal finite element method. Artificial ground motion accelerograms compatible with the design response spectrum of ASCE 7-16 are generated for the response history dynamic analysis needed in the optimization. The mean compliance of structure is minimized as a t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computer Methods in Applied Mechanics and Engineering
سال: 2018
ISSN: 0045-7825
DOI: 10.1016/j.cma.2017.09.005