Shock loading simulation using density-graded metallic foam projectiles
نویسندگان
چکیده
منابع مشابه
Mechanical properties of a density-graded replicated aluminum foam
The compressive mechanical properties of uniform and density-graded Al-6061 foams, produced by replication of polymer foams, are measured. hile the uniform foam shows compressive behavior characteristic of conventional (uniform) metallic foams with a near constant plateau stress, he density-graded foam exhibits a smoothly rising plateau stress. This behavior is modeled using a simple series com...
متن کاملJoining Ceramics to Metals using Metallic Foam
A general method for brazing ceramics to metals using a compliant metallic foam as a buffer layer has been developed. Using stainless steel foams, bonds between alumina and 316 stainless steel with shear strengths up to 33 MPa have been achieved. The resultant ductility enhances the resistance of the joint to thermal cycling; AlN-Inconel 600 bonds exhibited good thermal shock resistance. Alumin...
متن کاملNumerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading
In this article, the results of a study on energy absorption characteristics of foam-filled thin-walled structures with finite element analysis have been presented. Four specimens of thin walled structures have been filled with uniform foam and three specimens have been filled with linear four-layered foam. Also, eight layers HLH (High-Low-High) and eight layers LHL (Low-High-Low) have been sim...
متن کاملPerformance of metallic honeycomb-core sandwich beams under shock loading
Stainless steel square honeycomb core sandwich and solid monolithic beams have been subjected to high-pressure, short-duration impulses using a shock simulation technique involving high-speed impact of Al foam projectiles. The experiments have been designed to achieve two objectives: (i) to demonstrate the benefits of sandwich construction, and (ii) to assess the fidelity of dynamic finite elem...
متن کاملAmorphous metallic foam
The bulk glass forming alloy Pd43Ni10Cu27P20 is processed into a low-density amorphous metallic foam. Pd43Ni10Cu27P20 is mixed with hydrated B2O3 , which releases gas at elevated temperature and/or low pressure. Very homogeneous foams are achieved due to the high viscosity of the alloy even at its liquidus temperature. By processing at the liquidus temperature and decreasing the pressure to 10 ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2019
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2018.107546