Silica Removal using Aluminium Sulphate and Sodium Aluminate during the Bamboo Cooking Process

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Silica Removal using Aluminium Sulphate and Sodium Aluminate during the Bamboo Cooking Process

The desilication effects of aluminium sulphate and sodium aluminate on kraft bamboo pulp during the cooking process were investigated in this study. Furthermore, the residual aluminium ion concentration in the resulting black liquor was measured by inductively coupled plasma atomic emission spectrometry (ICP-AES) to evaluate the scaling properties of black liquor during the evaporation process....

متن کامل

One-part geopolymer mixes from geothermal silica and sodium aluminate

At present, the most commonly used building material is ordinary Portland cement (OPC). However, OPC has a negative environmental effect during synthesis, with the release of significant amount of CO2 greenhouse gas. The cement industry is responsible for 5-8% of total global anthropogenic CO2 emissions. Geopolymerization is a technology capable of turning industrial wastes into strong and chem...

متن کامل

consequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir

there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...

Anodisation of Aluminium in Aqueous Sodium Oxalate and Sodium Sulphate Media

An investigation was conducted on the anodisation of commercial grade aluminium in aqueous sodium sulphate and sodium oxalate solutions. The parameters investigated were anodisation potential and electrolyte composition. Degree of anodisation was evaluated by visual observation of the anodised surface, analyses of current-concentration graphs at constant potential and current-potential characte...

متن کامل

Precipitation of reactive aluminium hydroxide from an acidic aluminium sulphate solution by addition of sodium hydroxide

The goal of the present thesis was to study the possibilities of producing an aluminium hydroxide, which would easily dissolve in hydrochloric acid. Furthermore, the product should be easy to dewater. In the experiments, which were made batch-wise, a 50% sodium hydroxide was used to accomplish the precipitation. The precipitation of aluminium hydroxide is a dynamic process that depends on many ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: BioResources

سال: 2015

ISSN: 1930-2126

DOI: 10.15376/biores.10.4.7704-7714