Silicone Mold Accuracy in Polyurethane Vacuum Casting
نویسندگان
چکیده
منابع مشابه
Requirements Selection for Rapid Prototyping: Polyphenylsulfone as a Mold Material for Spin Casting Polyurethane Resin
For the development of a rotational symmetrical polyurethane part with a steel reinforcement, a requirement/constraint driven approach to process design has been taken. In this approach a scale model of the process was built using fused deposition modeling (FDM) rapid prototyping technique, then used to validate design, material and process parameters. After selection and testing on the scaled ...
متن کاملEffect of investment type and mold temperature on casting accuracy and titanium-ceramic bond.
This study evaluated the casting accuracy of crown margins and metal-ceramic shear bond strength (SBS) of pure titanium injected into casting molds made using 2 investment types at 3 mold temperatures. Sixty crown (30-degree beveled finish line) and 60 cylinder (5mm diameter × 8mm high) patterns were divided into 6 groups (n=10), and cast using a phosphate-bonded investment (P) and a magnesium ...
متن کاملNeutrophil chemotaxis on silicone and polyurethane surfaces.
Silicone vascular catheters have a greater risk of infection and produce greater inflammation in vivo and greater complement activation in vitro than other vascular catheter polymer materials. This study investigated whether polymorphonuclear leukocyte (PMNL) chemotaxis under agarose on silicone surfaces is different than on polyurethane (PU). Glass slides were coated with silicone and PU by us...
متن کاملInclusion Removal by Bubble Flotation in a Continuous Casting Mold
Fundamentally based computational models are developed and applied to quantify the removal of inclusions by bubbles during the continuous casting of steel. First, the attachment probability of inclusions on a bubble surface is investigated based on fundamental fluid flow simulations, incorporating the turbulent inclusion trajectory and sliding time of each individual inclusion along the bubble ...
متن کاملInterfacial Friction-Related Phenomena in Continuous Casting with Mold Slags
Many phenomena in continuous casting including the formation of surface defects are greatly affected by heat transfer in the mold. The interfacial slag layers between the solidifying steel shell and the mold wall dominates the resistance to heat removal and thus controls mold heat transfer. Surface defects, such as longitudinal cracks and star cracks have been associated with variation of slag ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Macromolecular Symposia
سال: 2021
ISSN: 1022-1360,1521-3900
DOI: 10.1002/masy.202000242