Silver Deposition onto Modified Silicon Substrates
نویسندگان
چکیده
منابع مشابه
Nanoscale tribology of graphene grown by chemical vapor deposition and transferred onto silicon oxide substrates
We present a comprehensive nanoscale tribological characterization of single-layer graphene grown by chemical vapor deposition (CVD) and transferred onto silicon oxide (SiO2) substrates. Specifically, the nanotribological properties of graphene samples are studied via atomic force microscopy (AFM) under ambient conditions using calibrated probes, by measuring the evolution of friction force wit...
متن کاملEfficient SERS substrates made by electroless silver deposition into patterned silicon structures
A nano fabrication process using caesium chloride in an island lithography scheme has been used to make wells in a silicon dioxide layer on silicon. Silver structures have been made in these wells using an electroless process that involves the reduction of silver ions and oxidation of silicon in the presence of fluoride ions. The silver deposition process is found to be diffusion controlled. Th...
متن کاملSurface roughening during plasma enhanced chemical vapor deposition of hydrogenated amorphous silicon on crystal silicon substrates
Surface roughening during plasma enhanced chemical vapor deposition of hydrogenated amorphous silicon on crystal silicon substrates" Physical Review B. The morphology of a series of thin films of hydrogenated amorphous silicon ͑a-Si:H͒ grown by plasma-enhanced chemical-vapor deposition ͑PECVD͒ is studied using scanning tunneling microscopy. The substrates were atomically flat, oxide-free, single-cr...
متن کاملLaser direct write of silver nanoparticles from solution onto glass substrates for surface-enhanced Raman spectroscopy
A solution based laser direct write technique for patterning of glass substrates with silver nanoparticles is presented. Photoreduction of an AgNO3 solution, by nanosecond UV laser pulses, produces a source solution of silver particles. A glass substrate is then inserted into this solution and the laser is scanned over its surface. Laser-induced fragmentation of the silver particles in the solu...
متن کاملSolid-State Manufacturing of Tungsten Deposits onto Molybdenum Substrates with Supersonic Laser Deposition
Near fully dense tungsten coatings onto molybdenum substrates have been demonstrated using the Supersonic Laser Deposition (SLD) process. This is a characteristic that is not readily achievable with refractory materials. The tensile strength of the tungsten deposited coatings, 724MPa, is comparable to that of wrought tungsten with no evidence of melting or substrate grain growth. The results ha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Physical Chemistry C
سال: 2017
ISSN: 1932-7447,1932-7455
DOI: 10.1021/acs.jpcc.6b12896