Simple 2D Model for Helical Flux-compression Generators
نویسندگان
چکیده
منابع مشابه
High Voltage Power Condition Systems Powered by Flux Compression Generators*
Compact, high-gain magnetic flux compressors (FCGs) are convenient sources of substantial energy for plasma-physics and electron-beam-physics experiments, but the need for highvoltage, fast-rising pulses is difficult to meet directly with conventional generators. While a variety of novel concepts employing simultaneous, axially-detonated explosive systems are under development, power-conditioni...
متن کاملAn Introduction to Explosive Magnetic Flux Compression Generators
Various types of explosive flux compression generators are illustrated and their relative advantages are compared. Experiments are described in which energy was supplied by these generators. The experiments were selected to show both versatility and limitations of the devices. Generator principles are derived from lumped parameter circuit theory. ,
متن کاملBrief History and Classification of Magnetic Flux Compression Generators
Sixty years after the first magnetic flux compression experiments were performed, it is now appropriate to attempt a classification of the various devices that are known collectively as either magnetic flux-compression generators or magnetocumulative generators. This paper summarises the main characteristics on which such a classification of generators can conveniently be based, with emphasis g...
متن کاملPractical Considerations in Helical Flux-Compression Generator Design
In recent years, the detailed mathematical modelling and design of helical flux compression generators has been the subject of many technical publications. A number of significant and important issues that arise during the design are not however always fully appreciated, and the paper aims to remedy this by addressing these issues and discussing how their various effects can be identified.
متن کاملA simple Analytical model for solidification cooling rate based on the local heat flux density
A new simple analytical model for prediction of cooling rate in the solidification process based on the local heat flux density extracted during solidification is introduced. In the modeling procedure, a solidifying control volume is considered in the mushy zone in which a heat balance equation is used to derive the present model. As the local heat flux density is a measurable parameter, the pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Laser and Particle Beams
سال: 1997
ISSN: 0263-0346,1469-803X
DOI: 10.1017/s0263034600010958