Simple characterisation factor for practical single-mode fibres
نویسندگان
چکیده
منابع مشابه
Simple Method for Polarization Dispersion Measurements in Long Single-Mode Fibres
The study of polarization dispersion in standard single-mode fibres takes on a growing importance, because the delay between polarization modes causes pulse broadening and may become predominant in multigigabit long-span optical links. The combined effects of weak birefringence and fluctuating mode coupling result in a stochastic behaviour of the polarization dispersion and of the output polari...
متن کاملPolarization mode coupling in long single-mode fibres
In this paper we look at the polarization state evolution of light propagating in long, birefringent, singlemode fibres in the presence of mode coupling. We show first that there always exist two orthogonal linear input polarizations which lead to linear output polarization for monochromatic light. The applicability of the coupled power equations is discussed and it is shown that they cannot be...
متن کاملBackscattering Measurement of Bending - Induced Birefringence in Single Mode Fibres
core were investigated. It was shown from the measurement that the beat length was about L = 23 mm (birefringence B = 5 x 10") and the state of linear polarisation of the incident light beam was maintained up to 0-6 kg/cm of the concentrated force when the incident plane of polarisation was coincident with the major axis of the fibre. It was also shown that the degree and the plane of polarisat...
متن کاملSliding Mode Control for Single-degree-of-freedom Nonlinear Structures
The occurrence of catastrophic earthquakes necessitates further researches in the structure engineering for retrofitting construction structures. In this paper, the application of the active control in the structures’ seismic response has been addressed. A single degree of freedom nonlinear structure has been studied. The nonlinear dynamic of the structure is considered in which, the nonlinear ...
متن کاملCharacterisation of CorGlaes® Pure 107 fibres for biomedical applications
A degradable ultraphosphate (55 mol % P2O5) quinternary phosphate glass composition has been characterised in terms of its chemical, mechanical and degradation properties both as a bulk material and after drawing into fibres. This glass formulation displayed a large processing window simplifying fibre drawing. The fibres displayed stiffness and strength of 65.5 ± 20.8 GPa and 426±143 MPa. While...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Electronics Letters
سال: 1977
ISSN: 0013-5194
DOI: 10.1049/el:19770489