Simulation of a parallel mechanical elbow with 3 DOF
نویسندگان
چکیده
منابع مشابه
A 3 DOF Piezohydraulic Parallel Micromanipulator
The paper presents a new parallel micromanipulator that is composed of three piezohydraulic actuation systems. The basic elements of the actuation system are a piezoelectric actuator, a bellows and hydraulic oil. The use of the flexible bellows results in a new type of parallel structure, where the joints are integrated into actuator links. The joint-free tripod-like micromanipulator is control...
متن کاملPneumo-Mechanical Simulation of a 2 Dof Planar Manipulator
The use of pneumatic technology in parallel kinematics structures allows to develop new solutions to be proposed in industrial field. Pneumatics is a low expensive technology and very suitable for those applications where a low cost and an easy to operate automation are required. The paper investigates the opportunity to use such a system for “pick and place” like operations analyzing the dynam...
متن کاملTracking control of parallel manipulator with 3-DOF
A parallel three degrees of freedom (3-DOF) manipulator known as Maryland manipulator is considered in this paper. The manipulator model considered in this paper is more practical because the offset lengths are not taken zero. The trajectory tracking control of the Maryland manipulator is done using linear–quadratic regulator (LQR) based proportional–integral–derivative (PID) controller. Three ...
متن کاملMechanical Simulation of the Extension and Flexion of the Elbow Joint in Rehabilitation
Objective: The goal of the present study was to improve the extension and flexion of the elbow joint for rehabilitation purposes, in terms of energy dissipation and of injuries caused by stress imposed on connective tissue by exercise equipments during force transfer , by investigation of viscoelastic property variations during change in speed of motion. Materials & Methods: A sample of five...
متن کاملMechatronic design of a 3-DOF parallel translational manipulator
This paper presents the development steps of a fast manipulator, up to the building of the experimental device, in a context of mechatronic design which implies the integration of several engineering disciplines. High performance of the manipulator has been achieved by means of the suitable integration of the mechanical part and the drive part. For the mechanical part we choose a 3-dof parallel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Research and Technology
سال: 2009
ISSN: 2448-6736,1665-6423
DOI: 10.22201/icat.16656423.2009.7.02.494