Simulation of Deformation and Temperature in Multipass H-Shape Rolling.
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Finite Elements Method (fem) Simulation Based Prediction of Deformation and Temperature at Rolling of Tubes on a Pilgrim Mill
Several authors described experiments aimed particularly at determination of demandingness of piercing processes, namely with respect to piercing mandrels or their stress load, similarly as e.g. at technology of piercing of extremely high blanks Skripalenko et al. 1 or piercing of continuously cast ingots from alloyed steel 2 . Komori 3 dealt with mathematical simulation of piercing according t...
متن کاملTemperature prediction of rolling tires by computer simulation
A numerical procedure has been applied for investigating the temperature distribution in a smooth tread bias tire of a light truck, operated under different speeds, pneumatic pressures, and loading conditions. Prior to simulation by the finite element analysis, two separate sets of testing, namely dynamic mechanical testing and material testing, have been conducted in relation to the evaluation...
متن کاملInvestigation and Simulation of Wire Non-Asymmetric Rolling Process
The non-asymmetric rolling process of copper and brass wire has been simulated with the Abaqus software. Presented finite element model in this simulation of rolling predicted output curvature and contact surface width in the non-asymmetric mode (in equality of diameter of rollers, the rotational speed of the rollers and the rollers’ surface finish). The material used in this research has strai...
متن کاملEFFECT OF FINISH ROLLING TEMPERATURE ON MICROSTRUCTURE,TEXTURE AND PLANAR ANISOTROPY IN ALUMINUM ALLOY AA3004 SHEETS
AA3004 alloy is widely used in can making. The major concern in the production of canbodies is earing, which develop by high planar anisotropy of rolled sheet. Balance ofrecrystallisation and rolling textures together with a uniform and fine grain microstructure canminimize the earing. The effects of finish rolling temperature (FRT) on planar anisotropy,microstructure, texture development and m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1998
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.64.729