Simulation of Material Flow Through a Sample Divider
نویسندگان
چکیده
منابع مشابه
effect of sub-grid scales on large eddy simulation of particle deposition in a turbulent channel flow
چکیده ندارد.
15 صفحه اولFlow through a laboratory sediment sample by computer simulation modeling
A laboratory sediment sample is digitized by X-ray computed tomography system to obtain a host matrix of size 100 of porosity 0.282. Flow through the porous medium is studied by an interacting lattice gas model for fluid driven by pressure bias. The bias //(0<//^ 1) is implemented via soft and hard pressure constraints in selecting the stochastic movement of fluid particles. The response of flu...
متن کاملNumerical Simulation of Turbulent Subsonic Compressible Flow through Rectangular Microchannel
In this study, turbulent compressible gas flow in a rectangular micro-channel is numerically investigated. The gas flow assumed to be in the subsonic regime up to Mach number about 0.7. Five low and high Reynolds number RANS turbulence models are used for modeling the turbulent flow. Two types of mesh are generated depending on the employed turbulence model. The computations are performed for R...
متن کاملNumerical Simulation of Squeezed Flow of a Viscoplastic Material by a Three-step Smoothed Particle Hydrodynamics Method
In the current work, the mesh free Smoothed Particle Hydrodynamics (SPH) method, was employed to numerically investigate the transient flow of a viscoplastic material. Using this method, large deformation of the sample and its free surface boundary were captured without the cumbersome process of the grid generation. This three-step SPH scheme employs an explicit predictor-corrector technique an...
متن کاملModelling and Simulation of a Material Flow System
Modern production control systems, e.g. a factory for cars or any other complex industrial good face two major problems. First, the systems need to become more decentralised to increase their availability. Second, the markets force the demand of smaller lot sizes and more flexibility to produce different goods in parallel. Nowadays, re-configuration of production control systems consists of two...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Science and Technology Research Journal
سال: 2018
ISSN: 2080-4075,2299-8624
DOI: 10.12913/22998624/85663