Simulation of stage I-crack growth using a 3D-model
نویسندگان
چکیده
منابع مشابه
A Cohesive Zone Model for Crack Growth Simulation in AISI 304 Steel
Stable ductile crack growth in 3 mm thick AISI 304 stainless steel specimens has been investigated experimentally and numerically. Multi-linear Isotropic Hardening method coupled with the Von-Mises yield criterion was adopted for modeling elasto-plastic behavior of the material. Mode-I CT fracture specimens have been tested to generate experimental load-displacement-crack growth data during sta...
متن کاملDurability Prediction Using Automatic Crack Growth Simulation
In order to be competitive aerospace companies need to produce cheaper, stronger, safer and more durable products. Environmental pressures have also highlighted the need to minimise the use of energy and the need for lighter vehicles. All these objectives have to be achieved while maintaining safety and durability. At the same time there is a worldwide trend towards operating aircraft beyond th...
متن کاملOne-Dimensional design of a three-stage axial compressor with Its 3D numerical simulation
The purpose of this study is to design a three-stage axial compressor with identical pressure ratio which makes an adequate pressure ratio and efficiency in design point conditions with rotational velocity of 38000rpm and mass flow rate of 3.2kg/s. First of all, considering some restrictions such as Dehaller number more than 0.7 in all sections of the stator and the rotor, and relative Mach num...
متن کاملSimulation of Crack Growth in Ductile Materials
During crack growth of real materials, the total energy released can be partitioned into elastic and dissipative terms. By analyzing material models with mechanisms for dissipating energy and tracking all energy terms during crack growth, it is proposed that computer simulations of fracture can model crack growth by a total energy balance condition. One approach for developing fracture simulati...
متن کاملModeling and simulation of intersonic crack growth
Intersonic crack growth has been studied using an interfacial fracture model in which an additional material phase within a bonding layer is proposed to describe the failure behavior of the interface. In this material phase, a strain gradient based damage model is applied with a built-in cohesive law, which is governed by an material intrinsic length scale that bridges the mechanisms that opera...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PAMM
سال: 2009
ISSN: 1617-7061
DOI: 10.1002/pamm.200910075