Simulations of an Infrared Composite Curing Process
نویسندگان
چکیده
منابع مشابه
Hardness of composite resin polymerized with different light-curing units
Introduction: The degree of polymerization depends on the type of light-curing unit. The aim of this study was to compare the hardness of composite resin cured by LED and Halogen light curing units. Methods: In this experimental study, 20 cylindrical samples of Tetric Ceram composite were prepared. Half of them were cured with Ultralume 2 LED and the other half with Astralis 7 Halogen light ...
متن کاملPaint Curing By Infrared Catalytic Thermoreactors
The standard method of curing industrial coatings has been accomplished by slow open air drying or somewhat faster gas heated convection air ovens. Electric infrared has also been used for curing paints for certain applications. While enhancing the rate of cure, the energy costs become excessive to operate. The introduction of gas fueled infrared catalytic thermoreactors is changing the way ind...
متن کاملCoupled Flow-thermal Scalable Process Modeling Simulations in Liquid Composite Molding of Composite Structures
Net-shape liquid composite molding (LCM) processes for the manufacturing of composite structures involve the permeation of a reactive thermoset polymeric resin through complex, fiber woven preforms. The physical behavior during the processing thus involves coupled multi-physics phenomena consisting of mass, thermal and species transport. The flow process models based on conservation of mass are...
متن کاملIndium light source for curing composite resins.
There is an existing problem of cumulative hazardous effect of violet and near ultra-violet light which is produced by standard polymerisation units. Another restrict is shallow depth of cure, particularly of darker composite shades in premolar and molar region. Searching for better light source we used indium resonance lines from several indium high pressure lamps and tested curing effect on t...
متن کاملCuring depth of composite resin light cured by LED and halogen light-curing units
The purpose of this study was to evaluate the polymerization effectiveness of a composite resin (Z-250) utilizing microhardness testing. In total, 80 samples with thicknesses of 2 and 4 mm were made, which were photoactivated by a conventional halogen light-curing unit, and light-curing units based on LED. The samples were stored in water distilled for 24 h at 37 ° C. The Vickers microhardness ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Engineering Materials
سال: 2011
ISSN: 1438-1656
DOI: 10.1002/adem.201000344