Single Fracture of Irregular Shaped Particle under Impact Loading
نویسندگان
چکیده
منابع مشابه
Experimental investigation of mode I fracture energy of adhesively bonded joints under impact loading conditions
Background Recently, the automotive industry has paid attention to multi-material structures to reduce CO2 emission. Hence, the use of light-weight and high-strength materials such as Al–Mg alloys, high-tensile-strength steel and carbon-fiber-reinforced plastics (CFRP) is essential to lighten the vehicle weight [1]. Joining methods for these dissimilar materials are the key to apply them into t...
متن کاملDynamic fracture of linear medium density polyethylene under impact loading conditions
In the present study three-point-bend impact experiments were conducted using a Modified Split Hopkinson Pressure Bar (MHPB) to better understand the correlation between impact velocity and critical dynamic energy release rate at crack initiation in linear medium density polyethylene (LMDPE). The MHPB experiments were conducted at impact velocities ranging from 1 to 7 m/s. The dynamic energy re...
متن کاملFracture behaviors under pure shear loading in bulk metallic glasses
Pure shear fracture test, as a special mechanical means, had been carried out extensively to obtain the critical information for traditional metallic crystalline materials and rocks, such as the intrinsic deformation behavior and fracture mechanism. However, for bulk metallic glasses (BMGs), the pure shear fracture behaviors have not been investigated systematically due to the lack of a suitabl...
متن کاملTwo-Dimensional acking For Irregular Shaped Objects
Packing problems arise in a wide variety of application areas. The basic problem is that of determining an efficient arrangement of different objects in a region without any overlap. The simplest packing problem is rectangular packing, where both the objects and the region are rectangular. Many research works have been done on two and three dimensional rectangular packing. However there are man...
متن کاملTwo-Dimensional Packing For Irregular Shaped Objects
Packing problems arise in a wide variety of application areas. The basic problem is that of determining an efficient arrangement of different objects in a region without any overlap. The simplest packing problem is rectangular packing, where both the objects and the region are rectangular. Many research works have been done on two and three dimensional rectangular packing. However there are man...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KAGAKU KOGAKU RONBUNSHU
سال: 1982
ISSN: 0386-216X,1349-9203
DOI: 10.1252/kakoronbunshu.8.710