Sinterability and microstructure evolution during sintering of ferrous powder mixtures
نویسندگان
چکیده
منابع مشابه
DENSIFICATION AND MICROSTRUCTURE CHARACTERISTICS OF A PREALLOYED ALPHA BRASS POWDER PROCESSED BY LIQUID PHASE SINTERING
The rapidly solidified prealloyed alpha brass powder with a size range of 40 to 100 μm produced by water atomization process was consolidated using liquid phase sintering process. The relationships between sintering temperature, physic-mechanical properties and microstructural characteristics were investigated. Maximum densification was obtained at 930 °C, under 600 MPa compacting pressure,...
متن کاملDensification Kinetics and Structural Evolution During Microwave and Pressureless Sintering of 15 nm Titanium Nitride Powder
Microwave sintering (MWS) of commercially available 15-nm-size nanocrystalline TiN powder was studied. Densification kinetics and grain growth mechanisms of nano-TiN were evaluated using non-isothermal heating up to 1500 °C with variable heating rates. A true nanocrystalline ceramic with ~80-nm-size grains and 94.5 % theoretical density was obtained via MWS consolidation at 1400 °C. At higher t...
متن کاملMicrostructural evolution of mullite during the sintering of kaolin powder compacts
Kaolin particles are usually ̄aky in shape. In the present study, kaolin powder compacts were prepared by applying the diepressing technique. The kaolin ̄akes tend to lie down on the plane which is perpendicular to the die-pressing direction. The powder compact thus shows anisotropic shrinkage after ®ring. A series of phase transformations take place as the kaolin is ®red at elevated temperatur...
متن کاملStudy of Graphite Content and Sintering Temperature on Microstructure Properties of Iron-Based Powder Preform
In this present work effect of temperature and graphite contents on the microstructural and mechanical properties of iron based powder metallurgy freeform was studied. The different graphite contents (0%, 2%, 5% and 10%) were mixed in iron powder and compact them in 100 KN. These specimens were sintered at 7000 C, 8500 C and 10000 C in muffle furnaces. Microstructural properties were evaluated ...
متن کاملLubricant Pyrolysis During Sintering of Powder Metallurgy Compacts
The chemistry surrounding the pyrolysis of N,NЈ-ethylenebisstearimide (EBS) compacted with iron powder is described for the first time. Heat treatment is carried out in a 5 vol pct hydrogen atmosphere (balance nitrogen) over the 100 °C to 850 °C range. The exhaust from the furnace is monitored by Fourier transform infrared and dispersive ultraviolet absorption spectroscopy; condensable material...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2013
ISSN: 1980-5373,1516-1439
DOI: 10.1590/s1516-14392013005000078