Sintering Behavior of Nano-sized Gd2O3-doped CeO2Powder Prepared by A High Energy Ball Milling
نویسندگان
چکیده
منابع مشابه
Sintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling
The aim of the present work is to study the effects of the nanostructured WC-20 wt. % (Fe,Co) with different ratios of iron to cobalt on the microstructure and hardness of sintered samples. Furthermore, a sample with a cobalt binder under the same condition was produced for the comparison purposes. The nanocomposite development, after different milling times, has been monitored by means of X-ra...
متن کاملPhonon density of states of nanocrystalline Fe prepared by high-energy ball milling
We performed inelastic neutron scattering measurements on nanophase Fe powders prepared by high-energy ball milling. Neutron energy loss spectra were measured for two states of the material: ~1! as milled, when the material had a characteristic nanocrystallite size of 12 nm; and ~2! annealed, when the material had a characteristic crystallite size of 28 nm. The longitudinal peak in the phonon d...
متن کاملIon Transport Properties of the Inverse Perovskite BaLiF3 Prepared by High-Energy Ball Milling
For many applications such as advanced energy storage systems, chemical sensors or electrochromic devices fast ionic conduction plays an important role. In many cases, see e.g., Refs. [1-3], nanocrystal-line ceramics with crystallite diameters smaller than 50 nm show an enhanced ion conductivity compared to their coarse-grained counterparts, i.e., single crystals or materials with µm-sized part...
متن کاملAtomic-scale structure of nanocrystalline ZrO2 prepared by high-energy ball milling
The atomic-scale structure of nanocrystalline ZrO2 obtained by ball milling has been studied using highenergy x-ray diffraction and the atomic pair distribution function technique. The studies show that, upon relatively short milling times, the parent crystalline material, monoclinic ZrO2, evolves into a nanocrystalline phase that is locally similar to monoclinic zirconia but shows a cubic-type...
متن کاملFabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering
Spark plasma sintering (SPS) is a sintering process that is capable of sintering hard worked powders in short times. This technique was used to fabricate bulk Cu and Cu-SiC nanocomposites. Pure Cu and mixed powders of Cu including 4 vol% of SiC nanoparticles were mechanically alloyed for 25 h and sintered at 750˚C under vacuum condition by SPS method. Microstructures of the materials were chara...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Korean Powder Metallurgy Institute
سال: 2008
ISSN: 1225-7591
DOI: 10.4150/kpmi.2008.15.4.302