Sintering of Aluminium Nitride
نویسندگان
چکیده
منابع مشابه
Thermal and electrical conductivity of Aluminium Nitride nanofluids
This study was designed to experimentally measure the thermal and electrical conductivities of Aluminium Nitride/Ethylene Glycol (AlN/EG) nanofluids. Transmission electron microscopy (TEM) was used to characterize the shape of AlN nanoparticles. Nanofluids with different particle volume concentrations of 0.5%, 1%, 2%, 3%, 4%, and 5% were utilized. The thermal and electrical conductivities of the...
متن کاملLow Temperature Sintering Additives for Silicon Nitride
This work deals with sintering additives for the low temperature pressureless sintering of Si3N4, via a transient liquid technique. Much attention has been given to the development of a sintering process using low-cost Si3N4 powder (Silzot HQ, Germany) as the starting material and employing sintering additives which are also both economically attractive and enable sintering at low temperatures....
متن کاملThe nitrogen vacancy in aluminium nitride
We have carried out a computational study for the nitrogen vacancy in charge states +3, +2 and +1 in AlN in the metastable zinc-blende phase. The vacancy and its four nearest-neighbour Al ions are treated as a molecular cluster, embedded in an infinite classical shell-model crystal. The following ground state properties, all of which are determinable from experiment, have been calculated: total...
متن کاملMechanochemical route to the synthesis of nanostructured Aluminium nitride
Hexagonal Aluminium nitride (h-AlN) is an important wide-bandgap semiconductor material which is conventionally fabricated by high temperature carbothermal reduction of alumina under toxic ammonia atmosphere. Here we report a simple, low cost and potentially scalable mechanochemical procedure for the green synthesis of nanostructured h-AlN from a powder mixture of Aluminium and melamine precurs...
متن کاملScandium Aluminium Nitride-Based Film Bulk Acoustic Resonators
Film bulk acoustic resonators (FBAR) are promising candidates to replace surface acoustic wave devices as filters or delay lines, but also offer exciting opportunities as biological or gas sensors. In this work, solidly mounted FBARs were manufactured by substituting commonly used pure aluminium nitride (AlN) by scandium doped aluminium nitride (ScAlN) thin films as the piezoelectric layer. The...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Association, Japan
سال: 1969
ISSN: 0009-0255,1884-2127
DOI: 10.2109/jcersj1950.77.884_136