Sintering of Tricalcium Phosphate by HIP

An improvement in sintering property of beta-tricalcium phosphate by addition of calcium pyrophosphate.

The sintering behavior of calcium pyrophosphate (CPP, Ca2P2O7)-doped beta-tricalcium phosphate [TCP, Ca3(PO4)2], prepared by solid state reaction, was investigated in-situ, using dilatometry. Pure beta-TCP undergoes phase transition to alpha-TCP at about 1200 degrees C; hence pure beta-TCP ceramics should be sintered bclow 1200 degrees C. Pure beta-TCP sintered body can achieve a relative densi...

THE INFLUENCE OF CALCIUM INFILTRATION ON THE SINTERING BEHAVIOR AND DISSOLUTION OF BETA-TRICALCIUM PHOSPHATE by

CALCIUM PHOSPHATE CEMENT: STUDY OF (BETA-TRICALCIUM PHOSPHATE, DICALCIUM PHOSPHATE AND CALCIUM CARBONATE SYSTEM

Calcium phosphate cements (CPCs), using B-tricalcium phosphate (ß-TCP, Ca3 (P04)2), dicalcium phosphate (DCP, CaHP04), calcium carbonate (Ca CO3), and hydroxylapatite (HAp, Ca10(P04)6(OH)2) as powder cement and disodium hydrogen phosphate (Na2HP04) solution as liquid component were prepared. After mixing the powder and liquid constituents, injectable and self-setting calcium phosphate cements (...

Synthesis And Characterization Of Nanocrystalline Hydroxyapatite Powder; And The Effects Of Oxide-based Sintering Additives On Tricalcium Phosphate

Calcium phosphate (CP) materials have been used extensively for bone replacement and augmentation due to their similarity to the mineral component of bone. In addition to being nontoxic, they are biocompatible, not recognized as foreign materials in vivo, and most importantly, exhibit osteoconductive behavior, being able to help in bone formation during healing. CPs form an intimate physicochem...

Fabrication of Poly(ε-Caprolactone), Hydrophilic and β-Tricalcium Phosphate Layer- by -Layer Nanofibrous Scaffolds for Tissue Engineering

In this study, using biodegradable polymers, nanofiberouse scaffolds were fabricated from the layer-by-layer electrospinning method, including two layer that poly (ε-caprolactone), polyvinylpyrrolidone deposited at first layer and poly (ε-caprolactone), polyvinyl alcohol , β-tricalcium phosphate at latter. After prepration of scaffolds, scanning electron microscopy (SEM), swelling, porosity, me...