Size Effect of Ultra Pure Ti Thin Strip under Asymmetrical Rolling
نویسندگان
چکیده
منابع مشابه
Effect of the asymmetrical rolling process on the micro hardness and microstructure of brass wire
Current experimental investigation deals with the effects of asymmetrical rolling parameters on the inhomogeneity, microstructure, mechanical, and geometrical properties of rolled brass wire. Toward this end, a roll machine with three different roll radii ratios was set up. The asymmetrical conditions are arranged using three different sets of rolls with different diameters that result into dif...
متن کاملTi/Si thin films during ultra rapid thermal annealing
WC introduce a new technique for rapidly heating (10’ “C/s) thin films using an electrical thermal annealing (ETA) pulse technique. By applying a high-current dc electrical pulse to a conductive substrate-heater material (Si), joule heating occurs thus heating the thin film. This method was demonstrated by heating thin films of aluminum at rates ranging from lo3 to lo6 “C/s. The temperature of ...
متن کاملApplication of Modified Slab Method in Asymmetrical Plate Rolling
In this paper, an analytical method based on Modified Slab Method of analysis is presented to study the asymmetrical rolling process due to difference in work rolls radii, rolls speeds and interface frictions. The shear force imposed on material along the contact region is considered to be a function of the frictional factor and the roll gap geometry. Elastic-plastic with linear work hardening ...
متن کاملSize Effect on Mechanical Properties and Texture of Pure Copper Foil by Cold Rolling
To study the size effect on the properties of copper, tensile tests were performed with pure copper foil (thickness range from 25 μm to 300 μm) by cold rolling. A pronounced size effect was observed at a thickness of 76 μm. The results showed that ultimate strength increased as sample thickness decreased from 300 μm to 100 μm, however, this was decreased as the thickness changed from 76 μm to 2...
متن کاملApplication of Modified Slab Method in Asymmetrical Plate Rolling
In this paper, an analytical method based on Modified Slab Method of analysis is presented to study the asymmetrical rolling process due to difference in work rolls radii, rolls speeds and interface frictions. The shear force imposed on material along the contact region is considered to be a function of the frictional factor and the roll gap geometry. Elastic-plastic with linear work hardening ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2020
ISSN: 1757-899X
DOI: 10.1088/1757-899x/772/1/012087