SLAG–REFRACTORY INTERACTIONS DURING ILMENITE SMELTING: THERMODYNAMIC SIMULATION AND EXPERIMENTAL DATA
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Thermodynamic simulation and pinch analysis of KCS11
In this study, a reputable Kalina cycle system, KCS 11, is simulated and analysed. Within this efficient cycle, there are three heat exchangers: the first heat exchanger is designated for heat absorption from the heat source, the second heat exchanger is designed for heat release to the cold source, and the third heat exchanger is designed for energy recovery. In order to achieve precise si...
متن کاملGamma Knife Simulation Using the MCNP4C Code and the Zubal Phantom and Comparison with Experimental Data
Introduction: Gamma Knife is an instrument specially designed for treating brain disorders. In Gamma Knife, there are 201 narrow beams of cobalt-60 sources that intersect at an isocenter point to treat brain tumors. The tumor is placed at the isocenter and is treated by the emitted gamma rays. Therefore, there is a high dose at this point and a low dose is delivered to the normal tissue surroun...
متن کاملMathematical simulation of a vehicle radiator by genetic algorithm method and comparison with experimental data
In many industrial processes, heat exchangers play the important role of the cooling function. The effective heat transfer rate in a specific process strongly depends on the heat exchanger design. The most popular type of heat exchangers commonly used in the automotive industry, is called "radiator". In engines, radiators play the important role of the cooling process. The present study is de...
متن کاملdirect smelting of steel: process simulation
the design and manufacture of direct smelting reactors depends on the rate of the physico-chemical reactions that occur in the particles immersed into the molten bath. investigation of the effects of the important parameters that influence the smelting rate of the particles that in the furnace are both difficult and expensive if the aimed is to take measure meuts under real practical conditions...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NOVYE OGNEUPORY (NEW REFRACTORIES)
سال: 2018
ISSN: 1683-4518
DOI: 10.17073/1683-4518-2018-3-28-33