SLIP BEHAVIOR OF BOLTED STEEL BEAM FRICTION JOINTS WITH WEDGE-SHAPED GAP
نویسندگان
چکیده
منابع مشابه
Numerical Analysis of Cyclic Behavior of Beam-To-Column Bolted Connections in Steel Frames
This article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. As the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. Four different specimens have been analyzed. These models had some differences such as bolt arrangement and the presence or a...
متن کاملStick-slip friction and wear of articular joints.
Stick-slip friction was observed in articular cartilage under certain loading and sliding conditions and systematically studied. Using the Surface Forces Apparatus, we show that stick-slip friction can induce permanent morphological changes (a change in the roughness indicative of wear/damage) in cartilage surfaces, even under mild loading and sliding conditions. The different load and speed re...
متن کاملStructural behavior of cold-formed stainless steel bolted connections
This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...
متن کاملBolted Timber Joints with Self-tapping Screws
The use of self-tapping screws with continuous threads in the joint area as a reinforcement to avoid splitting of timber members is studied. A theoretical model is developed to calculate the stress distribution around a pin-loaded hole in a timber joint, to predict brittle failure modes in bolted connections and to calculate the load in the reinforcing screws. Laboratory experiments on reinforc...
متن کاملnumerical analysis of cyclic behavior of beam-to-column bolted connections in steel frames
this article considers the seismic behavior of beam-to-column joints in steel frames for different bolt arrangements by using of finite element modeling. as the most important beam-to-column joint type, the beam-to-column joints with end-plate is chosen for the analysis. four different specimens have been analyzed. these models had some differences such as bolt arrangement and the presence or a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2001
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.66.127_4