Smart-Factory: Optimization and Process Control of Composite Centrifuged Pipes
نویسندگان
چکیده
منابع مشابه
The Lime and Flocculant Dose Optimization in the Clarification Process of a Sugar Factory
The objective of this research was the economic analysis of two different methods for the clarification of sugarcane juice. The first method was the method of using 700 ppm of CaO (final pH=7.9) and 1 ppm of Separan flocculant which previouly was being used. The other method was using 500 ppm of CaO (final pH=7.4) and 3 ppm of Separan flocculant. This study was carried out on an industrial scal...
متن کاملOptimization of the injection molding process of Derlin 500 composite using ANOVA and grey relational analysis
Warpage and shrinkage control are important factors in proving the quality of thin-wall parts in injection modeling process. In the present paper, grey relational analysis was used in order to optimize these two parameters in manufacturing plastic bush of articulated garden tractor. The material used in the plastic bush is Derlin 500. The input parameters in the process were selected according ...
متن کاملPEG Pipes Control
لوله های PEG در بیماران نیازمند به تغذیه طولانی مدت مورد استفاده قرار می گیرد. این لوله را معمولا می توان در بیمارانی که از تسهیلات وسیع مراقبتی استفاده می نمایند مشاهده نمود. اینکه بیماری حاد چگونه بسرعت برطرف می گردد، مهم نیست بلکه خطر سوء تغذیه با عوارض جدی ناشی از جابجایی مستقیم لوله PEG از اهمیت خاصی برخوردار است. در این مقاله، نحوه قرارگیری لوله PEG، فیکس کردن و باز بودن مجرای آن و همچ...
متن کاملImproved Optimization Process for Nonlinear Model Predictive Control of PMSM
Model-based predictive control (MPC) is one of the most efficient techniques that is widely used in industrial applications. In such controllers, increasing the prediction horizon results in better selection of the optimal control signal sequence. On the other hand, increasing the prediction horizon increase the computational time of the optimization process which make it impossible to be imple...
متن کاملDesign of smart composite materials using topology optimization
The topology optimization method is used to find the distribution of material phases that extremizes an objective function (e.g., thermal expansion coefficient, piezoelectric coefficients etc) subject to constraints, such as elastic symmetry and volume fractions of the constituent phases, within a periodic base cell. The effective properties of the material structures are found using a numerica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: American Journal of Applied Sciences
سال: 2016
ISSN: 1546-9239
DOI: 10.3844/ajassp.2016.1330.1341