Sodium alginate/cellulose nanocrystal fibers with enhanced mechanical strength prepared by wet spinning
نویسندگان
چکیده
منابع مشابه
Fabrication of κ-Carrageenan Fibers by Wet Spinning: Spinning Parameters
This study demonstrates the fabrication of κ-carrageenan fibers by a wet-spinning method and discusses three important spinning parameters: coagulation bath composition, spinning rate and post-spinning mechanical drawing. The as-spun fiber diameter decreased with KCl and ethanol concentration in the coagulation bath. In general, the ultimate tensile stress and elongation at break both increased...
متن کاملWet-spinning assembly of continuous, neat, and macroscopic graphene fibers
Graphene is now the most attractive carbon-based material. Integration of 2D graphene sheets into macroscopic architectures such as fibers illuminates the direction to translate the excellent properties of individual graphene into advanced hierarchical ensembles for promising applications in new graphene-based nanodevices. However, the lack of effective, low-cost and convenient assembly strateg...
متن کاملDrawing dependent structures, mechanical properties and cyclization behaviors of polyacrylonitrile and polyacrylonitrile/carbon nanotube composite fibers prepared by plasticized spinning.
Drawing to change the structural properties and cyclization behaviors of the polyacrylonitrile (PAN) chains in crystalline and amorphous regions is carried out on PAN and PAN/carbon nanotube (CNT) composite fibers. Various characterization methods including Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction and thermal gravimetric analysis are used to ...
متن کاملWet Spinning of Polymeric Fibers with High Loading of Carbon Nanotubes
Introduction Single-walled carbon nanotubes (SWCNTs) are well known for their excellent mechanical and conductivity properties. These properties make SWCNTs ideal candidates as reinforcement elements in polymer composites [1]. In composite manufacturing, the main problem is the SWCNTs agglomeration in polymer matrix. This phenomenon limits the SWCNTs loading in composite fibers to 2-5 wt % of S...
متن کاملMechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers
Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending si...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineered Fibers and Fabrics
سال: 2019
ISSN: 1558-9250,1558-9250
DOI: 10.1177/1558925019847553