Sodium sulfate attack on Portland cement structures: experimental and analytical approach

Multi-mode X-ray Study of Sodium and Magnesium Sulfate Attack on Portland Cement Paste

Sulfate attack is potentially one of the most damaging forms of degradation affecting portland cement-based materials. However, despite over six decades of study, considerable uncertainty remains in optimally selecting and proportioning materials for sulfate resistance, and current understanding of the actual mechanisms of degradation in sulfate environments remains incomplete. In this research...

Influence of Titanium Dioxide Nanoparticles on the Sulfate Attack upon Ordinary Portland Cement and Slag-Blended Mortars

In this study, the effects of titanium dioxide (TiO₂) nanoparticles on the sulfate attack resistance of ordinary Portland cement (OPC) and slag-blended mortars were investigated. OPC and slag-blended mortars (OPC:Slag = 50:50) were made with water to binder ratio of 0.4 and a binder to sand ratio of 1:3. TiO₂ was added as an admixture as 0%, 3%, 6%, 9% and 12% of the binder weight. Mortar speci...

Development of calcium sulfate – ggbs – Portland cement binders

Binders manufactured using a blend of gypsum, ground granulated blast furnace slag and Portland cements are technically viable and possess considerable environmental and economic advantages when compared to binders manufactured using Portland cement alone. As such, the evaluation of binders made from these materials offers a promising research focus in the quest to produce technically sound, en...

The Use of Limestone in Portland Cements: Effect on Thaumasite Form of Sulfate Attack

An approach for predicting the compressive strength of cement-based materials exposed to sulfate attack

In this paper, a support vector machine (SVM) model which can be used to predict the compressive strength of mortars exposed to sulfate attack was established. An accelerated corrosion test was applied to collect compressive strength data. For predicting the compressive strength of mortars, a total of 638 data samples obtained from experiment was chosen as a dataset to establish a SVM model. Th...