Software to Predict the Process Parameters of Electron Beam Welding
نویسندگان
چکیده
منابع مشابه
Optimization of Process Parameters of Electron Beam Welded Fe49Co2V Alloys
Electron beam welding has shown a remarkable job in the space industry for welding of components. It is performed under a vacuum environment that eliminates foreign matter such as hydrogen, oxygen, and other gases. Joining of similar and dissimilar materials is the main advantage of electron beam welding with high depth to width ratio as well as sharp focus at the point where parts are to be we...
متن کاملDetermination of Process Parameters for Electron Beam Sintering (EBS)
Additive Layer Manufacturing (ALM) methods, like Electron Beam Sintering (EBS) constitute an interesting process concerning the production of small series and customised products. However, transient effects occur during processing due to the different physical principles of an electron beam (EB). Thus, process knowledge from similar ALM technologies, for instance Selective Laser Melting, can no...
متن کاملPhoton-beam subsource sensitivity to the initial electron-beam parameters.
One limitation to the widespread implementation of Monte Carlo (MC) patient dose-calculation algorithms for radiotherapy is the lack of a general and accurate source model of the accelerator radiation source. Our aim in this work is to investigate the sensitivity of the photon-beam subsource distributions in a MC source model (with target, primary collimator, and flattening filter photon subsou...
متن کاملThe use of Electron Beam Welding in Turbomachinery Manufacturing
As demands for higher performance migrated from aircraft engines to land based gas turbines the need for EB welding came along also. The transfer of EB welding processes from relatively thin section components in aircraft turbines to land based aero derivative turbines is straightforward since the basic design and function of both aero and aero derivative components are the same or similar. How...
متن کاملKnowledge-based systems using neural networks for electron beam welding process of reactive material (Zircaloy-4)
Bead-on-plate welding of zircaloy-4 (a reactive material) plates was conducted using electron beam according to central composite design of experiments. Its predictive models were developed in the form of knowledge-based systems in both forward and reverse directions using neural networks. Input parameters considered for this welding of reactive metals were accelerating voltage, beam current an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2021
ISSN: 2169-3536
DOI: 10.1109/access.2021.3092221