Solar Cell Improvement by using a Multi Busbar Design as Front Electrode
نویسندگان
چکیده
منابع مشابه
Solar cell improvement by using a multi busbar design as front electrode
The demand for low-priced solar cells with higher efficiencies becomes more necessary to reach grid parity. An optimized solar cell design which uses the same equipment as state of the art solar cells could be easily implemented into solar industry. In this paper an approach for a front side design is discussed, using more busbars than the widely used three busbar design for the solar cell fron...
متن کاملHighly Efficient Multi-busbar Solar Cells with Ag Nano-particle Front Side Metallization
The main target for a commercially successful solar cell production is to decrease the cost/Watt-peak ratio. In the last years new techniques like fine line screen printing or plating of the front electrode entered the market. These new techniques enable a reduction of Ag or Ag containing paste of the front grid or even a substitution of this metal. Cu is a suited candidate because of its high ...
متن کاملMulti-busbar solar cells and modules: high efficiencies and low silver consumption
Ideally, future photovoltaic modules show higher power output without increasing costs during cell production or module interconnection. Today significant losses occur during stringing the cells in a module by using standard 3busbar technology. In this paper an elegant approach for a front side design is discussed by using more busbars than the widely used 3-busbar design for the solar cell fro...
متن کاملThe multi-busbar design: an overview
The demand for highly efficient photovoltaic modules at low costs leads to new solar cell designs. For enhanced module efficiency the cell efficiency has to be optimized regarding later operation under module conditions. This implies that the interconnected solar cell structure has to be assessed. Commonly the solar cell itself is optimized separately. In this work an easy to implement cell des...
متن کاملImprovement of the open circuit voltage by modifying the transparent ITO front electrode in amorphous n-i-p solar cells
At the front contact of thin film silicon solar cells, the junction between the p-doped window layer and the n-type transparent electrode results in a barrier that must be surmounted by the charge carriers. The barrier height is governed by the work function difference of these two materials. For different compositions of the well known In2O3-SnO2 (ITO) system, we find that higher oxygen partia...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2012
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2012.07.056