Solar Collector Application using Nanofluid in Thermosyphon
نویسندگان
چکیده
منابع مشابه
Application of functionalized nanofluid in thermosyphon
A water-based functionalized nanofluid was made by surface functionalizing the ordinary silica nanoparticles. The functionalized nanofluid can keep long-term stability. and no sedimentation was observed. The functionalized nanofluid as the working fluid is applied in a thermosyphon to understand the effect of this special nanofluid on the thermal performance of the thermosyphon. The experiment ...
متن کاملNanofluid-Based Direct Absorption Solar Collector
This Article is brought to you for free and open access by the Mechanical Engineering at Digital Commons @ Loyola Marymount University and Loyola Law School. It has been accepted for inclusion in Mechanical Engineering Faculty Works by an authorized administrator of Digital Commons@Loyola Marymount University and Loyola Law School. For more information, please contact [email protected]. Re...
متن کاملAn experimental investigation on the performance of a symmetric conical solar collector using SiO2/water nanofluid
One of the effective methods to improve the thermal efficiency of solar collectors is using nanofluids as the coolant. The present study experimentally investigated the effect of SiO2/water nanofluid with 1% mass fraction on the performance of a symmetric collector, i.e. conical solar collector. The conical solar collector with 1 m2 area and normal to the earth was tested in Ahvaz, a city in th...
متن کاملPerformance of Evacuated Tube Solar Collector Using Water-based Titanium Oxide Nanofluid
Experiments are undertaken to determine the efficiency of an evacuated tube solar collector using water-based Titanium Oxide (TiO2) nanofluid at the Pekan Campus (3 ̊32’ N, 103 ̊25’ E), Faculty of Mechanical Engineering, University Malaysia Pahang, for the conversion of solar thermal energy. Malaysia lies in the equatorial zone with an average daily solar insolation of more than 900 W/m2, which c...
متن کاملDirect Absorption Solar Collector using Carbon Nanotubes Nanofluid: An Experimental Investigation
In this study, the efficiency of direct absorption solar collector (DASC) using carbon nanotube nanofluid in the mixture of water and ethylene glycol as the base fluid was experimentally investigated and compared with the efficiency of the flat plate solar collector (FPSC). The results show that the maximum efficiency of the DASC using the base fluid and absorptive bottom surface is about 4.7% ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Research in Materials Science
سال: 2020
ISSN: 2289-7992
DOI: 10.37934/arms.65.1.115