Solar Desalination using CPC and Heat Pipe

Interconnected Heat Pipe Solar Collector

This paper deals with the performance of a heat pipe solar collector. The solar collector consisted of an interconnected heat pipe so as to reduce the production cost by using an interconnected heat pipe because all the heat pipes can be evacuated, sealed and tested at once. Performance of a prototype of the heat pipe solar collector was experimentally examined, and the results were compared wi...

Potential of Heat Pipe Technology in Nuclear Seawater Desalination

Experimental Analysis of Solar Water Heater Using Pulsating Heat Pipe

Solar energy is used for solar water heater in domestic and industrial purpose. Pulsating heat pipe is a fast responding, flexible and high performance thermal conducting device. The CLPHP system described in this study relies on the natural forces of gravity and capillary action and does not require an external power source. The flat plate collector consisted of a 2 mm thick sheet of Aluminum ...

The Research of Solar-heated Generation System Using CPC Collector

In this paper, a new solar-heated generation system with capacity of 10kW is designed. The system is based on solar-heated Rankine cycle. The CPC solar energy collector array is used as the main heat source, and the gas boiler as the assistant heat source. The heat storage facility provides heat for put-off 24 hours generating without sun’s radiation. The paper is focused on the analysis of fou...

Solar Power Technologies for Desalination

Throughout the world, there are regions of vast extent that have many favorable features, but whose development is principally limited by the lack of fresh water. In arid areas where large-scale development has already occurred, e.g. parts of the Middle East and North Africa, the extraction of fresh water via desalination plants requires very large energy consumption. This motivates the develop...