Solid Solution Hardening in Supersaturated Al-Mg-Si Alloy
نویسندگان
چکیده
منابع مشابه
Enhanced Age Hardening in an Al-Mg-Si Alloy Using High-Speed Compression
The age hardening of an Al-Mg-Si alloy was enhanced by the effect of high-speed (105 s11) compression prior to aging. This enhancement of the age hardening is brought about by the formation of vacancy clusters during high-speed compression. High resolution transmission electron microscopy reveals that these vacancy clusters form stacking fault tetrahedra. Following peak aging, vacancy clusters ...
متن کاملLocalized Recrystallization in Cast Al-Si-Mg Alloy During Solution Heat Treatment: Dilatometric and Calorimetric Studies
During heat treatment, the work piece experiences a range of heating rates depending upon the sizes and types of furnace. When the Al-Si-Mg cast alloy is heated to the solutionizing temperature , recrystallization takes place during the ramp-up stage. The effect of heating rate on recrystallization in the A356 (Al-Si-Mg) alloy was studied using dilatometric and calorimetric methods. Recrystalli...
متن کاملExperimental and computational creep characterization of Al–Mg solid-solution alloy through instrumented indentation
Carefully designed indentation creep experiments and detailed finite-element computations were carried out in order to establish a robust and systematic method to extract creep properties accurately during indentation creep tests. Samples made from an Al–5.3mol%Mg solid-solution alloy were tested at temperatures ranging from 573 to 773K. Finite-element simulations confirmed that, for a power-la...
متن کاملTHE INFLUENCE OF DRY SLIDING ON PRCIPITATION HARDENING BEHAVIORS OF Al-Cu-Si ALLOY
Abstract: Cold working performed before an aging treatment has a significant effect on size and amount of precipitate produced. This could be caused by the increase in defect density, such as vacancies and dislocations. In this research, the Al-Cu-Si alloy was solution-treated, wear-tested and then artificially aged for a period of 1–5 h. Changes in the amount of precipitate, in the lattice par...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 2018
ISSN: 0021-4876,1880-6880,2433-7501
DOI: 10.2320/jinstmet.j2018015