Solid state amorphizing reaction of Al30Ta70 alloy powders by the rod milling technique.
نویسندگان
چکیده
منابع مشابه
Synthesis and Processing of SnO2, CaSnO3 and Ca2SnO4 Nanopowders by Solid-State Reaction Technique
The nanopowders of SnO2, CaSnO3 and Ca2SnO4 in the size rang of 5-70 nm have been prepared using solid-state reaction technique. The technique is convenient and inexpensive in comparison to the conventional routes of compound prepared and processing where, many steps of mixing and annealing are i...
متن کاملSynthesis & Characterization of CaB4O7 Powder by Solid-State Reaction
The synthesis of calcium tetraborate was investigated in a temperature ranging from 800℃ to 900℃ using the solid-state reaction method. The synthesis was done using ammonium tetraborate tetrahydrate as the source of boron. At temperatures of 800 ℃ and 880 ℃, the mixed phases from different compounds were formed. At the optimum temperature of 840℃, the mixed phase was only composed of meta and t...
متن کاملThe crystallization process of amorphous Al80Fe20 alloy powders prepared by ball milling
The amorphous-to-crystalline transition during thermal annealing of amorphous Al80Fe20 alloy powders prepared by ball milling was investigated by means of magnetothermal analysis and X-ray diraction. Following structural relaxation and stress relief processes, a metastable phase precipitates during primary crystallization, and a mixture of intermetallic compound (h-Al13Fe4) and fcc Al is devel...
متن کاملsynthesis and processing of sno2, casno3 and ca2sno4 nanopowders by solid-state reaction technique
the nanopowders of sno2, casno3 and ca2sno4 in the size rang of 5-70 nm have been prepared using solid-state reaction technique. the technique is convenient and inexpensive in comparison to the conventional routes of compound prepared and processing where, many steps of mixing and annealing are involved. formation of resultant compounds was explained on the basis of reaction taken place between...
متن کاملTitanium foams produced by solid-state replication of NaCl powders
Open-celled titanium foams were fabricated by vacuum hot pressing of a blend of Ti and NaCl powders followed by NaCl removal in water. Densification kinetics of the Ti/NaCl blends are measured at 780 ◦C at various pressures (30–50MPa), NaCl volume fractions (30–70%) and NaCl powder sizes (50–500 m). As compared to pure Ti powders, densification kinetics of the blends is faster for relative dens...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1991
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.38.59