Specifications for a coupled neutronics thermal-hydraulics SFR test case
نویسندگان
چکیده
منابع مشابه
Comparative analysis of neutronics/thermal-hydraulics multi-scale coupling for LWR analysis
The aim of the research described in this paper is to perform consistent comparative analyses of two different approaches for coupling of two-scale, two-physics phenomena in reactor core calculations. The physical phenomena of interest are the neutronics and the thermal-hydraulics core behaviors and their interactions, while the spatial scales are the “global” (assembly/channel-wise) and the “l...
متن کاملThermal Hydraulics Design Limits
The following discussion of PWR steady state and transient design limits is extracted from the theses of Carter Shuffler and Jarrod Trant while the BWR discussion is extracted from Paolo Ferroni's thesis (covers steady state only). These limits are a simplified and narrower discussion than the relevant NRC standard review plan you will also be referred to. All materials are directly extracted f...
متن کاملQuality Indicators for Automotive Test Case Specifications
Testing is an important quality assurance activity during development of automotive software. Automotive OEMs and suppliers use test case specifications to specify, mostly informal, test cases as well as supporting information like traces to requirements. While the quality of the test case specifications has a high influence on the quality of the subsequent testing, quality of informal automoti...
متن کاملArchitecting Specifications for Test Case Generation 1
The Specification and Description Language (SDL) together with its associated tool sets can be used for the generation of Tree and Tabular Combined Notation (TTCN) test cases. Surprisingly, little documentation exists on the optimal way to specify systems so that they can best be used for the generation of tests. This paper, elaborates on the different tool supported approaches that can be take...
متن کاملAppendix 1 Thermal Hydraulics, Draft for Comment
Several different fuel failure criteria have been used in previously NRC-sponsored SFP accident studies. Benjamin, et. al. used the onset of runaway fuel clad oxidation as the fuel failure criterion in NUREG/CR-0649 [Ref. 1]. This criterion was criticized because clad rupture can occur at a relatively low temperature causing a gap release. The consequences of gap release can be significant if t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2017
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/781/1/012047