Spectrometric control of coatings deposition process
نویسندگان
چکیده
منابع مشابه
Titanium Oxide (TiO2) Coatings on NiTi Shape Memory Substrate Using Electrophoretic Deposition Process
The aim of the present research is to convert bioinert surface of NiTi to bioactive and biocompatible surface. In order to develop a bioactive and corrosion resistant film on NiTi, electrophoretic deposition process was done and TiO2 particles were deposited on the NiTi surface. Suspensions including TiO2 particles were prepared using a mixture of acetone and n-butanol (0%, 30%, 60%, 80% and 10...
متن کاملChemical Vapor Deposition of Antimicrobial Polymer Coatings
There is large and growing interest in making a wide variety of materials and surfaces antimicrobial. Initiated chemical vapor deposition (iCVD), a solventless lowtemperature process, is used to form thin films of polymers on fragile substrates. To improve research efficiency, a new combinatorial iCVD system was fabricated and used to efficiently determine the deposition kinetics for two new po...
متن کاملA facile layer-by-layer deposition process for the fabrication of highly transparent superhydrophobic coatings.
A facile layer-by-layer deposition process is developed to fabricate highly-transparent superhydrophobic coatings, which comprise the underlying antireflective nanoporous silica layer and the top transparent superhydrophobic SiO(2) nanoparticle layer.
متن کاملRun by Run Advanced Process Control of Metal Sputter Deposition
Metal sputter deposition processes for semiconductor manufacturing are characterized by a decrease in deposition rate from run to run as the sputter target degrades. The goal is to maintain a desired deposition thickness from wafer to wafer and lot to lot. Run by run (RbR) model-based process control (MBPC) has been applied to metal sputter deposition processes at Texas Instruments. RbR MBPC, b...
متن کاملStructure, composition, and defect control during plasma spray deposition of ytterbium silicate coatings
Environmental barrier coatings (EBCs) are needed to protect SiC structures exposed to high temperatures in water vapor-rich environments. Recent studies of a tri-layer EBC system consisting of a silicon layer attached to the SiC, a mullite diffusion barrier and a lowsteam volatility ytterbium silicate topcoat have shown some promise for use at temperatures up to 1316 C. However, the performance...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2016
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/735/1/012055