Spring-back simulation of flat symmetrical laminates with angled plies manufactured through autoclave processing

Buckling of Laminates with Multiple Through-the-Width Delaminations Using Spring Simulation Model

Delamination is one of the most common failure modes in composite structures. In particular, when the laminated composites are subjected to compressive loads, delamination becomes a constraint in the design process. In this study, the system is modeled as a plate supported by an elastic foundation. The elastic adhesive layer between the buckled sublaminates is represented by some parallel sprin...

Effect of shallow angles on compressive strength of biaxial and triaxial laminates

BACKGROUND Biaxial (BX) and triaxial (TX) composite laminates with ±45° angled plies have been widely used in wind turbine blades. As the scale of blades increases, BX and TX laminates with shallow-angled plies (i.e. off-axis ply angle <45°) might be utilized for reducing mass and/or improving performance. The compressive properties of shallow-angled BX and TX laminates are critical considering...

SIMULATION-BASED DESIGN OPTIMIZATION AND CONTROL OF THICK COMPOSITE LAMINATES MANUFACTURED BY RESIN TRANSFER MOLDING by

Free Vibration Analysis of Variable Stiffness Composite Laminates with Flat and Folded Shapes

In this article, free vibration analysis of variable stiffness composite laminate (VSCL) plates with flat and folded shapes is studied. In order to consider the concept of variable stiffness, in each layer of these composite laminated plates, the curvilinear fibers are used instead of straight fibers. The analysis is based on a semi-analytical finite strip method which follows classical laminat...

simulation and design of electronic processing circuit for restaurants e-procurement system

the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...