Square Surface Aerator: Process Modeling and Parameter Optimization
نویسندگان
چکیده
منابع مشابه
Efficient Rapid Deodorization of Mercaptan-Contaminated Soil by Sono-Fenton Process: Response Surface Modeling and Optimization
The entry of mercaptans into the environment as an odor pollutant has always been considered as one of the environmental concerns. In this research, a sonochemical oxidation (sono-Fenton) method was used for rapid deodorizing of tert-butyl mercaptan (TBM) contaminated soil. The design of the experiments was conducted by CCD method and the effect of four different factors was investigated on the...
متن کاملModeling and Optimization of Nano-bubble Generation Process Using Response Surface Methodology
In this paper, size distribution of nano-bubbles was measured by the reliable and fast method of laser diffraction technique. Nano-bubbles were produced using a nano-bubble generator designed and made based on hydrodynamic cavitation phenomenon in Venturi tubes. A Central Composite Design with Response Surface Methodology was used to conduct a five factor, five level factorial experimental desi...
متن کاملMODELING SURFACE TENSION AND WALL ADHESION IN MOLD FILLING PROCESS
Abstract: In this study an algorithm for mold-filling simulation with consideration of surface tension has been developed based on a SOLA VOF scheme. As the governing equations, the Navier-Stokes equations for incompressible and laminar flows were used. We proposed a way of considering surface tension in mold-filling simulation. The proposed scheme for surface tension was based on the conti...
متن کاملVortex behaviour of an unbaffled surface aerator
Agitating liquids in an unbaffled surface aeration tank leads to the formation of a vortex in the region of the impeller shaft. The types and characteristics of the vortex govern the process phenomena of a surface aeration tank. In the present work, experimental results and empirical correlations have been obtained to relate the vortex depth to a number of physical factors. Experiments have bee...
متن کاملOptimization of process parameter for surface finishing in abrasive flow finishing process
274 Optimization of process parameter for surface finishing in abrasive flow finishing process Ravi Gupta (M.E) Asst. Prof.(Lovely Professional University) [email protected] , Abstract-Abrasive flow finishing is a non-conventional finishing process that is used for finishing of work piece which are difficult to finish by conventional method i.e. by honing, lapping and other machining operati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Environmental Informatics
سال: 2007
ISSN: 1726-2135,1684-8799
DOI: 10.3808/jei.200700092