Stabilisation of high-sulphide tailings with alkali activated fly ash – mechanical performance

PROPERTIES OF ALKALI-ACTIVATED FLY ASH CONCRETE BLENDED WITH SLAG

ALKALI Activated FLY-ASH Based Geopolymer Concrete

Considering the increasing demand for developing alternative construction materials, due to the growing environmental concerns, this paper discusses the feasibility of alkali activated geo-polymer concrete, as a future construction material. The main objective of this study involves observation of structural behaviours of the fresh fly ash-based geo-polymer concrete, understanding the basic mix...

Microstructural Characteristics of Geopolymers Based on Alkali-Activated Fly Ash

Aluminosilicate geopolymers with a high silica molar ratio have been prepared by mixing Croatian coal-ash (ASTM Class F) and sodium silicate solution (water glass, technical grade). The samples were cured at 85 °C for 8 h and 24 h in different experimental conditions. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM/EDS) have been use...

Study on the Alkali Activated Fly Ash Mortar

The development of alkali-activated binders seems to present a greener alternative to OPC. The present study has been made on the low calcium fly ash with alkali activator as an alternative binding material as mortar. The mortar has been prepared with ennore sand and Indian fly ash mixed with alkali activator fluid consisting of sodium silicate and sodium hydroxide of different concentrations. ...

High Performance Bricks from Fly Ash

Bricks whose solid ingredient is 100% fly ash have been manufactured. The manufacturing process uses techniques and equipment similar to those used in clay brick factories. The bricks produced were about 28% lighter than clay bricks. The bricks manufactured from fly ash possessed compressive strength higher than 40 MPa. This exceeds some of the best of load carrying clay bricks available by mor...