Stability Analysis of Nanobeams by Modified Finıie Element Transfer Matrix Method
نویسندگان
چکیده
منابع مشابه
Rock Slope Stability Analysis Using Discrete Element Method
Rock slope stability depends very much on the strength features of the rock and the geometrical and strength characteristics of the discontinuities (e.g., roughness, wall strength and persistence). Since a rock mass is not a continuum, its behavior is dominated by such discontinuities as faults, joints and bedding planes. Also, Rock slope instability is a major hazard for human activities and o...
متن کاملA Proposed Modeling Method in Finite Element Slope Stability Analysis
Limit-equilibrium method (LEM) and finite element method (FEM) with strength reduction method (SRM) techniques are the most widely used analysis tools in slope stability assessment. Recently, researchers have reported that both factor of safety (FOS) values and failure surfaces obtained from LEM and FEM are generally in good agreement, except in some particular cases. In this paper, the FOS and...
متن کاملdynamic analysis of semiconductor laser amplifier using transfer matrix method
transfer matrix method (tmm) has been applied to analyze characteristics of semiconductor laser optical amplifiers. the input signal is sinusoidal modulating wave and we do not assume the modulating bias signal as well. we have shown that the distoration arises from gain modulation at low modulation frequencies, but in microwave modulation frequencies, the gain takes an average value and the re...
متن کاملDynamic Analysis of Offshore Wind Turbine Towers with Fixed Monopile Platform Using the Transfer Matrix Method
In this paper, an analytical method for vibrations analysis of offshore wind turbine towers with fixed monopile platform is presented. For this purpose, various and the most general models including CS, DS and AF models are used for modeling of wind turbine foundation and axial force is modeled as a variable force as well. The required equations for determination of wind turbine tower response ...
متن کاملModified Fixed Grid Finite Element Method in the Analysis of 2D Linear Elastic Problems
In this paper, a modification on the fixed grid finite element method is presented and used in the solution of 2D linear elastic problems. This method uses non-boundary-fitted meshes for the numerical solution of partial differential equations. Special techniques are required to apply boundary conditions on the intersection of domain boundaries and non-boundary-fitted elements. Hence, a new met...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: El-Cezeri Fen ve Mühendislik Dergisi
سال: 2021
ISSN: 2148-3736
DOI: 10.31202/ecjse.892876