Stacked Auto-Encoder Based Fault Location in VSC-HVDC
نویسندگان
چکیده
منابع مشابه
Fault Current Characterisation in VSC-based HVDC Systems
The DC-side line faults in high-voltage direct-current (HVDC) systems utilising voltage-source converters (VSCs) are a major concern for multi-terminal HVDC systems in which complete isolation of the faulted system is not a viable option. A number of challenges are posed by both pole-to-pole and pole-to-ground faults including the presence of very fast and high amplitude discharge current from ...
متن کاملAuto-encoder Based Data Clustering
Linear or non-linear data transformations are widely used processing techniques in clustering. Usually, they are beneficial to enhancing data representation. However, if data have a complex structure, these techniques would be unsatisfying for clustering. In this paper, based on the auto-encoder network, which can learn a highly non-linear mapping function, we propose a new clustering method. V...
متن کاملControlled Islanding with Vsc-hvdc Links Acknowledgements
Controlled islanding has been widely discussed in the literature as a novel concept for the power system protection. However, the islanding can result in unbalanced islands where the power mismatch will often cause an instability that can lead either to a subsequent load shedding or generator tripping within the islands. Controlled VSC-HVDC links can mitigate the negative consequences of the co...
متن کاملThe Effect of Grid Topology on Transient Fault Currents in Multi-Terminal VSC-HVDC Offshore Networks
This paper investigates different network topologies of potential future DC offshore grids with respect to their impact on transient fault currents for permanent single pole-toground faults. Investigations are carried out on a twelve-terminal ±320kV VSC-HVDC network modeled around the physical topology of the North Sea. Results are obtained through EMTP simulations in PSCAD using a detailed, fr...
متن کاملfault location in power distribution networks using matching algorithm
چکیده رساله/پایان نامه : تاکنون روشهای متعددی در ارتباط با مکان یابی خطا در شبکه انتقال ارائه شده است. استفاده مستقیم از این روشها در شبکه توزیع به دلایلی همچون وجود انشعابهای متعدد، غیر یکنواختی فیدرها (خطوط کابلی، خطوط هوایی، سطح مقطع متفاوت انشعاب ها و تنه اصلی فیدر)، نامتعادلی (عدم جابجا شدگی خطوط، بارهای تکفاز و سه فاز)، ثابت نبودن بار و اندازه گیری مقادیر ولتاژ و جریان فقط در ابتدای...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2018
ISSN: 2169-3536
DOI: 10.1109/access.2018.2848841