Standing Air Bubble-Based Micro-Hydraulic Capacitors for Flow Stabilization in Syringe Pump-Driven Systems
نویسندگان
چکیده
منابع مشابه
Hydraulic jumps: turbulence and air bubble entrainment
-A free-surface flow can change from a supercritical to subcritical flow with a strong dissipative phenomenon called a hydraulic jump. Herein the progress and development in turbulent hydraulic jumps are reviewed with a focus on hydraulic jumps operating at large Reynolds numbers typically encountered in natural streams and hydraulic structures. The key features of the turbulent hydraulic jumps...
متن کاملA MEMS-based Air Flow Sensor with a Free-standing Micro-cantilever Structure
This paper presents a micro-scale air flow sensor based on a free-standingcantilever structure. In the fabrication process, MEMS techniques are used to deposit asilicon nitride layer on a silicon wafer. A platinum layer is deposited on the silicon nitridelayer to form a piezoresistor, and the resulting structure is then etched to create afreestanding micro-cantilever. When an air flow passes ov...
متن کاملA transient-flow syringe air permeameter
In response to the need to better describe spatial variations in permeability, we designed and built a new portable field air permeameter for use on rocks in outcrop and core. In this instrument, a chamber containing a small volume of air in contact with the rock is suddenly increased in volume creating a vacuum, causing air to flow from the rock into the chamber. The instantaneous chamber volu...
متن کاملDrag Reduction by Surfactant Solutions in Gravity Driven Flow Systems
Efflux time measurements are carried out for gravity draining of a liquid from a large cylindrical tank (where the flow is essentially laminar) through single exit pipe in the absence and presence of Cetyl Pyridinium Chloride (CPC) surfactant solutions. The variables considered are initial height of liquid in the tank, dia. of tank, length of the exit pipe and concentration of surfactant. T...
متن کاملAn electro-osmotic micro-pump based on monolithic silica for micro-flow analyses and electro-sprays.
A high-pressure electro-osmotic micro-pump fabricated by a sol-gel process is reported as a fluid-driving unit in a flow-injection analysis (FIA) system. The micro FIA system consists of a monolithic micro-pump on a glass slide (2.5 x 7.5 cm), a micro-injector, and a micro-sensor (2.5 x 1.5 cm). The monolithic silica matrix has a continuous skeleton morphology with micrometer-sized through-pore...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micromachines
سال: 2020
ISSN: 2072-666X
DOI: 10.3390/mi11040396