Static bearing capacity investigation of grouted square hollow section sleeve connection

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental study of grouted sleeve lapping connector under tensile load

The performance of the grouted sleeve lapping connector that is used to connect reinforcement bars in a precast concrete structure is studied. A total of 63 specimens, varying in bar diameter and lap length, were tested under tensile load. The failure modes, ultimate tensile strength values and load-displacement curves of the specimens are discussed in the study. Two equations are proposed for ...

متن کامل

Effect of sleeve length on deformation properties of grouted splices

Tests on 12 grouted splices were performed to investigate their deformation properties under tensile loading. Test variables included diameter and type of spliced bars and the size of splicing sleeves. Finite element method based models of the splices were built, verified and used to investigate the effect of sleeve length on the deformation properties of the grouted splices. The sleeve length ...

متن کامل

Experimental and Numerical Modeling of the Effect of Groundwater Table Lowering on Bearing Capacity of Shallow Square Footings

The lowering of the groundwater table causes the area above the water table to become unsaturated and capillary phenomena to appear in this zone. This means that the bearing capacity of shallow footings will be influenced by capillary stress or matric suction. In this research, the effect of groundwater table lowering on the bearing capacity of a shallow square model footing on dense sand has b...

متن کامل

Evaluation of Static and Dynamic Methods for Determining the Bearing Capacity of the Driven Pipe Piles (TECHNICAL NOTE)

Determination of the pile capacity is always a major concern for the safe geotechnical engineering design. Different direct and indirect methods have been proposed for determining pile bearing capacity such as static and dynamic approaches. Each method depends on the condition of the soil and type of pile as well as accessibility to necessary information. In this study bearing capacity of drive...

متن کامل

three-dimensional analysis of bearing capacity of square footings on convex slopes by finite element method

soil slopes are sometimes curved in plan rather than being straight. this curvature,especially when it is convex, decreases the bearing capacity of the slope. finite element methodhas been used here in this research to investigate the reducing effect of curvature on bearingcapacity of a slope. failure of soil has been assumed to be according to mohr-coulomb criteria;but the flow rule of the soi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Advances in Structural Engineering

سال: 2021

ISSN: 1369-4332,2048-4011

DOI: 10.1177/13694332211012575