Static Recrystallization of Hot Deformed Austenite and Induced Precipitation Kinetics in Vanadium Microalloyed Steels.
نویسندگان
چکیده
منابع مشابه
Particle-Size-Grouping Model of Precipitation Kinetics in Microalloyed Steels
The formation, growth, and size distribution of precipitates greatly affects the microstructure and properties of microalloyed steels. The computational Particle-Size-Grouping (PSG) kinetic models were developed to simulate precipitate particle growth due to collision and diffusion mechanisms. Firstly, the standard PSG method for collision is clearly explained and verified. Then a new PSG metho...
متن کاملEquilibrium Model of Precipitation in Microalloyed Steels
The formation of precipitates during thermal processing of microalloyed steels greatly influences their mechanical properties. Precipitation behavior varies with steel composition and temperature history and can lead to beneficial grain refinement or detrimental transverse surface cracks. This work presents an efficient computational model of equilibrium precipitation of oxides, sulfides, nitri...
متن کاملInfluence of Boron on Initial Austenite Grain Size and Hot Deformation Behavior of Boron Microalloyed Steels
The initial austenite grain size of boron microalloyed steel with three different amounts of boron (20, 40, and 60 ppm) was investigated under different heating temperatures (1150, 1100, and 1050 °C), and hot compression tests of samples in a wide range of temperature (900–1100 °C) and strain rate (0.1–10 s−1) were conducted. It was found that the initial austenite grain size increases with inc...
متن کاملIsothermal Recrystallization Behavior of Cold-deformed Martensite in an Ultra-low-carbon Microalloyed Steel
One of the most promising ways to produce a grain-refined microstructure in some steel materials is the thermomechanical processing route of subcritical recrystallization annealing of a cold-deformed martensite structure. In the present study, the microstructural evolutions and the associated recrystallization kinetics under various subcritical annealing heat treatment conditions are explored i...
متن کاملMetallographic techniques for the determination of the austenite grain size in medium-carbon microalloyed steels
Different techniques have been investigated to seek the best procedure to reveal the prior-austenite grain boundaries in three medium-carbon microalloyed steels. This study has been carried out over a wide range of temperatures (950–1250 C) and it has been found that thermal etching (TE) is the best technique to reveal the prior-austenite grain boundaries in these steels. D 2001 Elsevier Scienc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 1994
ISSN: 0915-1559
DOI: 10.2355/isijinternational.34.689