Steady State Longitudinal Thermal Conductivity Measurement Method of a Thick Specimen with Low Thermal Conductivity ~MTP Method~
نویسندگان
چکیده
منابع مشابه
Note: Thermal conductivity measurement of individual poly(ether ketone)/carbon nanotube fibers using a steady-state dc thermal bridge method.
Customized engineered fibers are currently being used extensively in the aerospace and automobile industries due to the ability to "design in" specific engineering characteristics. Understanding the thermal conductivity of these new fibers is critical for thermal management and design optimization. In the current investigation, a steady-state dc thermal bridge method (DCTBM) is developed to mea...
متن کاملThermal Analysis of Convective-Radiative Fin with Temperature-Dependent Thermal Conductivity Using Chebychev Spectral Collocation Method
In this paper, the Chebychev spectral collocation method is applied for the thermal analysis of convective-radiative straight fins with the temperature-dependent thermal conductivity. The developed heat transfer model was used to analyse the thermal performance, establish the optimum thermal design parameters, and also, investigate the effects of thermo-geometric parameters and thermal conducti...
متن کاملAnalysis of 3ω method for thermal conductivity measurement
The 3ω method for measurement of thermal conductivity of a solid usually consists of a strip heater above a substrate, and the method is based on an approximate solution of the heat conduction problem in which the heater thickness is neglected. We establish a two-dimensional heat conduction model for the heater-on-substrate 3ω method which takes into account the finite thickness of the heater. ...
متن کاملA Non-Steady-State Method of Measuring the Thermal Conductivity of Transparent Liquids
A plane source method has been developed for non-steady-state measurements of the thermal conductivity of transparent liquids. The plane source is realized by using an electrically heated metal foil, suspended in the liquid. The temperature distribution is described by using the concept of instantaneous heat sources giving a simple expression of the optical path, which is recorded with wave-fro...
متن کاملMeasuring Thermal Conductivity by Ångstrom’s Method
In this experiment, κ, the thermal conductivity of a rod of brass, was measured by periodically heating one end of the rod. Turning the heater attached to the rod on and off with a 10 mHz square wave signal, waves of heat were sent along the length of the rod, measured by two thermistors a distance ∆x apart. Taking these temperatures as a function of time, a Fourier transform was applied to a 1...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Japan Institute of Electronics Packaging
سال: 2018
ISSN: 1343-9677,1884-121X
DOI: 10.5104/jiep.21.108