STEP DESIGN FOR CFRP BONDED ONTO STEEL PLATE UNDER UNI-AXIAL LOAD
نویسندگان
چکیده
منابع مشابه
Stepped-end Design for Carbon Fiber -reinforced Plastic (cfrp) Bonded onto a Steel Plate under Uni-axial Load
In the application of multiple Carbon Fiber-Reinforced Plastic (CFRP) plates onto a structural steel member, stepping of the CFRP plate ends is often adopted to prevent debonding. This approach requires the nonuniform extension of CFRP plate lengths. In this study, to shorten the length of CFRP plates, a nonuniform overlapping arrangement of several CFRP plate ends was proposed and the theoreti...
متن کاملMechanical Behavior of BFRP-Steel Composite Plate under Axial Tension
Combining the advantages of basalt fiber-reinforced polymer (BFRP) material and steel material, a novel BFRP-steel composite plate (BSP) is proposed, where a steel plate is sandwiched between two outer BFRP laminates. The main purpose of this research is to investigate the mechanical behavior of the proposed BSP under uniaxial tension and cyclic tension. Four groups of BSP specimens with four d...
متن کاملRetrofitting of Beam-Column Joint Using CFRP and Steel Plate
─This paper presents the retrofitting of beam-column joint using CFRP (Carbon Fiber Reinforced Polymer) and steel plate. This specimen was tested until failure up to 1.0% drift. This joint suffered severe damages and diagonal cracks at upper crack at upper column before retrofitted. CFRP were wrapped at corbel, bottom and top of the column. Steel plates with bonding were attached to the two bea...
متن کاملBond and Splice Behavior of High Modulus Cfrp Materials Bonded to Steel Structures
Research on the use of CFRP materials for retrofit and strengthening of steel bridges and structures has increased in recent years. In order to implement these types of strengthening systems to longer span members, it is important to establish an effective method to splice adjacent lengths of CFRP laminates. This paper describes an experimental program to investigate the bond behavior of carbon...
متن کاملBond–Slip Relationship for CFRP Sheets Externally Bonded to Concrete under Cyclic Loading
The objective of this paper was to explore the bond-slip relationship between carbon fiber-reinforced polymer (CFRP) sheets and concrete under cyclic loading through experimental and analytical approaches. Modified beam tests were performed in order to gain insight into the bond-slip relationship under static and cyclic loading. The test variables are the CFRP-to-concrete width ratio, and the b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Society of Civil Engineers, Ser. A1 (Structural Engineering & Earthquake Engineering (SE/EE))
سال: 2011
ISSN: 2185-4653
DOI: 10.2208/jscejseee.67.351